Activity in Technology and Support
Cisco ATA192 bricked? Solid green PRT & Solid Green Phones 1 & 2
Hi all,I have 3 Cisco ATA 192's all of which are broken or bricked and hoping someone has a solution as after Googling I couldn't find one.2 of the units are suck with 3 SOLID GREEN lights. PRT + Phone 1 + Phone 2 - all solid green. (As per the pictu...
Incoming connections timeout or slow when do connect. isrc1111
i have had the system i have in place for some time and had no problems, when using a 2 router approach [isp1 and isp2] but since i merged both onto 1 device, ISRC111 there is an issue with incoming connections via isp1. i am using the same acl's and...
8300 cisco router connecting to isp radio link, having slow speeds.
Hello, I'm currently configuring a site. They have isp that uses a radio link. I been having issues when the internal networks reach out to the internet that they are super laggy and slow speeds. Has any configure a site that instead of having a actu...
Nexus 5672UP – Ethernet Ports Not Visible After Slot Reset
I have a Cisco Nexus 5672UP switch running NX‑OS 7.3(6)N1(1). The switch was functioning normally, but after performing a reset, the Ethernet ports on Slot 1 (ports 1‑48) are no longer visible in show interface status or show interface brief.
VXLAN BGP EVPN Default Route
Hello all, On Border Edges(DC01-BE001-6/7) am trying to advertise default route from GRT to MPBGP-EVPN but not able to do it properly with the following configruration. Thanks in advance for tips and correction **************************************...
Cisco secure firewall 1200 series
I cannot find anywhere if the local admin account for FDM has a break class in any documentation. If say the account has been compromised. Can we console into the cli to reset the pw or do we have to reimage firepower and reload the configs?
Jeetoindia – Where Every Match Feels Like a Winning Moment
Jeetoindia is where thrill meets opportunity. Experience nonstop sports action, live odds, and exciting markets designed for true game lovers. Play smart, stay ahead, and feel the rush every moment. Join the winning side today and turn every match in...
FMC Broken Database
Unfortunately, neither Cisco nor our partner is able to assign the contracts to us, so I can't create TACs. Therefore, here in the forum:We have a defective database in the FMC. Here's the error message:[Mon Oct 20 11:50:12 2025][FATAL] [missing all ...
802.1X auth fails certs missing CN
Hi FolksWe’ve recently started seeing a random issue on about 10 endpoints where both wireless and wired 802.1X authentication failsCurrent setup:Wireless: User + Machine authenticationWired: Machine authentication onlyAuthentication method: EAP-TLSC...
Resolved! OSPFv3 Interface ID
Hello, everyone. I understand that OSPFv3 separates links from prefixes and purposely moves the prefix information from T1/T2 LSAs into T8/T9. The RFC states the following: o The Hello packet now contains no address information at all. Rather,...
Netconf Authentication Failure
Hello,I am working on a new deployment of Catalyst Center 2.3.7.10 and the new Catalyst 9350 switches. I have used PNP to onboard the switch to catalyst center, assigned hte switch to a site and then provisioned the device which pushed down the inten...
Switch Control Plane Traffic
I want to know about how a Switch forward it's control plane traffic like cdp/vtp/dtp messages on a trunk. Will they be forwarded with tag or untagged and why??
IP 7900 Series, Displays turning off.
Hello All,We have some legacy 7900 colour IP phones on a cucm install, however the displays keep entering sleep mode, is there a way to turn them on 24/7 as they seem to turn off randomly. current settings are for both common profile, enterprise pro...
configure 9800 WLC as Hybrid Legacy and also SDA Fabric WLC
I have an existing WLC contain Four branches only one of them will use SD-access. the other three branches will remain as a legacy all the AP using flex connect.for head office users in order to get the same IP for wire and wireless the WLC should be...
Resolved! SDA: Edge node behind Edge node
Good morning Just a simple question about the physical design of a sd-access topology. Is it supported that an Edge Node is attached to another Edge Node ? Kind regards
| User | Helpful Count |
|---|---|
| 59 | |
| 54 | |
| 38 | |
| 36 | |
| 36 |
