Activity in Technology and Support
Area border router not giving area routes to ospf neighbor
Hello! I'm currently practicing on configuring multi area ospf but their is a problem.In the 172.16.56.0 subnet,the main router isnt getting any area routes but the area border router connected to it does. They are ospf neighbors,in the right subnet,...
Cisco 9800 catalyst AP groups via tags and profiles
Hello Guys, Have anyone done AP grouping in Cisco catalyst 9800 controller. Via using tags and profiles. i have done going through document. but its boarder to understand. Have anyone provide simple understanding it will be helpful. 2 Groups of AP....
2x Cisco C9606 with VSL and 2x2 SUP-2 ?
Hello,I'm planning to build our now Core-system with 2 Chassis C9606R and to combine them with SVL (stackwise virtual link).The question ist, how many Supervisor Engines can be used in this constellation?In our actual core (C6807):2 chassis - 1 SUP f...
C9120 Sys-log Messages Wont Stop
What is going on:From the U-Boot I am following this recovery method.https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9120axi-access-point/217537-repairing-c9120-c9115-access-points-from.htmlAfter resetting the AP, and logging in, I'm try...
Auto Update Cisco Anyconnect VPN.xml Server List
I have updated the VPN.xml file on my Cisco ASA 5515 removing one of our VPN FQDNs that can be connected too. However it has not updated on the client side to reflect the change. Is there a way for this process to be automatic upon connection to A...
Forcing 2 APs to upgrade first when migrating from a 5520 to CW9800M
Hello, I have an upgrade soon where we are upgrading from a pair to 5520s (8.10.190.0) to a pair of CW9800Ms (17.14.1). There are over 400 APs (1852s, 2702, 9115s) to be migrated. The window for this upgrade is tight. I was thinking if we could force...
Resolved! Best practice in switch firmware version
Hello,Is it best practice to upgrade the firmware version of the switch to the latest?
Trying to send some routes out a VDSL2/Ethernet Interface
Hi,I'm working on a C3945e with a EHWIC-VA-DSL-M installed. It's configured as an Ethernet Interface interface Ethernet0/2/0 description C3945e-1/Centurylink VDSL2 link ip address (PUBLIC_IP_HERE) 255.255.255.128 ip flow ingress ip nat outside i...
Resolved! ISE 2.7 VM to 3.3 upgrade
Hi all,Wondering what is the best way to upgrade ISE VM's (PAN/PSN and SAN/PSN) from 2.7 to 3.3 patch 3.I'm planning to do Backup&Restore method into 2 new VM's (assign temp IP addresses then change these to the production ones, when finished).Should...
Find power consumption
Hello,I want to find the total power consumption of an UCS server ( UCS managed and standalone) from within RHEL and from FI. Can someone advise on that? Thanks
sx80 web access after factory reset
im not trying to beat a dead horse, i have googled, and tried several things. it seems once the codec is registered via the 16 digit code local web access is blocked until retstored through the webex control hub. i aquired a sx80, fr it, loaded newes...
Resolved! ISR4431 reboot loop with %CPPHA-3-INITFAIL (0x43)
Hi all,One of the two ISR4431 started to boot into errors after power outage. I can enter ROMMON, able to boot many different IOSes (including external TFTP download via Gi0 interface), but all of them got stuck & reboot with the messages below (more...
Recommendation for hardware token
Hello Community, can someone recommend me an hardware token? I mean some with the possibility to generate secret digit-codes on a display. Reason for it: We have an employee without a smartphone or any phone and we need to authenticate against a VMwa...
Disabling trunk interfaces
Hello!There is such a problem in the network. There is a C9500-40X core, it is responsible only for the user segment of the LAN (desktop PC, IP phones, printers, air conditioners, UPS, video cameras, etc.). Eleven floors are connected to it via MM fi...
online image resource for Cisco Room Navigator touch panel pages?
I am trying to add some images to a custom user quickstart guide for a customer & have found that's it's near impossible to find the specific images that would match the end user's touch panel layouts online. I have found a few workable images that ...
| User | Helpful Count |
|---|---|
| 107 | |
| 89 | |
| 73 | |
| 62 | |
| 61 |
