Activity in Technology and Support
AP9115axi
Hi ,I am facing one issue. AP9115AXI (access point) acquired IP address from DHCP. Confirmed with ARP table on switch.But the command sh cdp nei detail - doesn't show IP address of AP. AP not yet associated to WLC.Any suggestion?With Regards,Ravindr...
NCS5504 line card not detected after Upgrade
I have upgraded cisco NCS-5504 router . Router was successfully upgraded but all the line cards are not showing. In platform command type is unknown and state is SW_Inactive.Regards Salman
Trustsec Network Authorization not Working
Hi All,I am newly building trustsec in my environment,trying to add one of the switch under trustsec. Have configured Trustsec settings and COA on the ISE for the switch and added the appropriate aaa commands , radius servers and cts commands.But sti...
CiscoISE policy applying on switch problem
Hello,I have a problem with applying policies from CiscoISE 3.2 on switch C3750. It simply doesn't stop the unauthenticated users from logging in to switch, nor it prevent commands that are forbidden by the created policy. In Live Logs I can see that...
FDM DHCP Relay
HelloWe have Cisco 1140 with FDM Management, version is 7.2.5. How do I need to configure DHCP Relay? Because I did all configuration, but int not working
About Setting Up CBX151AX
Having tried to register the MAC address on the website, the LED on the device is still flashing blue.
C1117-4P ISR router PPTP VPDN connection ok unable to ping LAN
I have recently upgraded from a 887 router to the 1100 ISR, we have a third party client that uses this router to VPN into the local network and connect to some of the services on the LAN. They use PPTP and standard windows client however since being...
Not powering up KEM (PID: CP-8800-A-KEM)with CP 8851
I bought a new KEM (PID: CP-8800-A-KEM) along with the cisco ip phone CP8851 but unable to power up the KEM. I am using C2951 ISR with IOS 15.6 and Cisco Unified Communications Manager Express (CME) version 11.5. Please note i am using call manager e...
Help with extended access list
So I've been working on my project and I've implemented vlans nad also router stick.Now I want to block connections between vlans that are not same with extended access list but something does not work..Here are the commands that I've writtenip acces...
C9800 WNCd
i've seen this item "Site Tags AP to WNCd distribution" in best practice of C9800 Design and Deploymentmy quiestion is how can i configure multiple WNCd and where is the location of settings in webui?
Trying to drop certain logging messages with discriminator
There's two network monitoring accounts that constantly log in and out of my devices, and it's making it difficult to use logs to troubleshoot issues because the logs are totally clogged up with useless messages. I looked at the forums on how to drop...
CTF: my first post
Hi ! Thanks for setting this CTF! It is a great way to learn. bye
48 Port Full PoE vs 48 Port PoE
Guys I am trying to determine what the difference between "full poe" and "poe"I am replacing a few WS-C3560G-48PS-S switches at my clients and need to make sure I am providing them with the same PoE functionality that they currently have with the WS-...
Cisco 9200L-48P-4G SFP
I think I already know the answer to this.Will an SFP-10G-SR work in the 4G model if the interface is set to 'speed 1000' ?It currently keeps err-disabling in the 9200, even with speed at 1000I have a 9200 connected to a CBS350 (which I am sure will ...
Changelog updated: April 17th
There have been updates to the ThousandEyes Changelog over the last few days. You can review the changes here, or by using the link on the right hand side of our forum page titled "Quick Links". A photograph of the ThousandEyes forum page, with the ...
| User | Helpful Count |
|---|---|
| 103 | |
| 99 | |
| 81 | |
| 76 | |
| 58 |
