Technology and Support

modification of Unified CM Telephony Provider in uccx,greyed out

Hello everyone,I have uccx 12.5 installed and integrated with CUCM 12.5.This uccx was redundant for a long time (2years ago).I have a new cucm 12.5.i want to integrate the new cucm 12.5 with the uccx.I wanted to modify the Unified Telephony provider ...

Configuring MFA Using Cisco ISE and Microsoft Azure MFA

Using Microsoft Azure MFA for multifactor authentication within Cisco ISE.

CSCvq35621 - N3K-C3548P-10GX GLC-TE DOM error

N3K-C3548P-10GX Running 9.3(13). Problem is still there, even if bug related to 9.2.2 Bug didn't provide much information. GLC-TE should not have DOM activated. I've confirm the behaviour on a N9K. This generate log error and monitoring alert. ...

Cisco 9300X Static routes don't work to SVI Tunnels

NOTE: I have done the same test setup with 4000 series routers, and routing works fine.I have successfully setup 3 SVI (Static Virtual Interface) tunnels with IPSEC between 2 9300X switches.- I can ping the tunnel IPs- I can ping each VLAN interface ...

JTapi program to monitor all devices in CUCM

Hi I am looking to write a program using JTAPI to monitor all call events of all registered devices ( Phones alone - all types).. Can anyone help me with the classes i need to use and high level steps for the same.Your reply is appreciated.

Can we add ip based access list in zone based firewall in C8300-2N2S-6

We are trying to block few public ips in zone-based firewall. What typically in zone-based firewall, we can control based on protocol. Can we add an access list to be filtered in zone-based firewall policy map?

Unable to Ping and Access GUI on Cisco 2960XR

I configured a Cisco Catalyst 2960 Switch. I set vlan1 as the ip address of the switch as well as interface 1 with 192.168.1.1 with a class C subnet. Strangely I am not able to access the GUI, ping the switch or Telnet directly. However, I am able to...

Telemetry Data on 9300 Switches (App Visibilty and Experience)

Hallo All! What is the reason that when enabling Telemetry on C9300 Series Switches, only Application Name, Usage and Througput are shown? Switches configured with telemetry show only Application Visibility (Name and Throughput) in DNA center. Why is...

nx-os EoL 9.3.x

Hello All, Question in Nexus 9.x We have an EoL notice for version 9.3x. There's no replacement available at this time. Can we assume that a version 9.4 version will be released? I don't see any EoL for 9.x at this time. The customer doesn't...

Migrate C2802 APs from 5520 WLC to 9800 WLC

Hi, did anyone tried to pre-load the image to the AP prior to the migration between 5520 to 9800 ? source version 8.10.151.0 to version 17.6.4thanks!

sntc portal login issue

i cannot log in to the SNTC portal, i have the necessary roles that were applied last week (beyond the 24 hour period that is required for SNTC portal access), but each time i try to log in at services.cisco.com, I'm redirected back to the registrati...

Please explain those terms. I can't understand. Help needed!

"Distribution Switch for Formation" & "Enterprise and Active Directory (AD) Zone Switch"

DMVPN issue with 800 series routers

I have a DMVPN network with 4331 hub routers. Our HQ in Memphis has a hub on AT&T, and another on Lumen. Our New York hub is also a Lumen connection. All are 500Mb up/down. We have about 35 spokes around the US that peer to all 3 routers. BGP is the ...

applyTransParams question

Hi,Maapi.commitQueueResult is deprecated and we should use applyTransParams.I need help on how to use applyTransParams.I have the following code:CommitParams cp = new CommitParams();cp.setCommitQueueSync();cp.setNoOverwrite();CommitQueueResult result...

FTD IKE/IPSec VPN site to site certificate authentication error

hello all ,recently i tried to configure VPN site to site with certificate authentication type, i got the certificate signed by a third party autority , and when i did the debugs i got this log :CRYPTO_PKI: bitValue of KEY_USAGE = a0PKI[7]: CRYPTO_PK...

Technology and Support

Browse the Community

Certified Remanufactured Equipment

Cisco Software

Cisco Start

Collaboration

DevNet Hub

Data Center and Cloud

Internet of Things (IoT)

Networking

Online Tools and Resources

Security

Service Providers

Services

Small Business Support Community

Wireless - Mobility