Hi, i have MXP6000 with 9.1 software. Cant make it register with SIP. No single packet comes from MXP to server.Has anyone been able to make it register with SIP server?Config is quite simple:xConfiguration Conference SIP URI: "6000@10.96.37.10"*c xC...
Hi everyone, I need some advice, I have two side; First; CCM 6.1.5+CTMS(Cisco TelePresence Multipoint Switch)+Telepresence 1000+Cisco 3845(c3845-adventerprisek9_ivs-mz.124-22.YB8.bin). Second; CCM 8.5+CTMS+TP 1000+3945 (3900-universalk9-mz.SPA.15...
We recently upgraded our VCS to X6.1.With Movi 4.1, when logging in, the presence defaults to 'appear offline' when logging in no matter what 'sign me in as' is set to. I can change the presence status without getting any error messages, but the upda...
hi,I want to know if i have Cisco TelePresence Profile 52-inch on three different sites..then do i only need multisite option (in the software) on the 3 Telepresence profile equipment or i need a seperate MCU as well to do multisite calls?RegardsNara...
Hi,I have just set up a VCS Control and a VCS Expressway. I have set up the traversal client on the VCS Control using port 6001 H.323 and 7001 SIP. I have set up the traversal server on the VCS Exp using the same ports. I keep getting "H.323 Failed...
So after attempting this using a low budget(HP) converter. Can anyone recommend a decent HDMI to VGA converter? We will not be utilizing the audio signals from the HDMI.Thank you,Ed
I try to get a cheat sheet to program Cisco7940G and 7942G to work with my IPPBX "IPitomy". I just like to know how to configure the basic, like how to find phone IP from DHCP, how to enter server (PBX) IP, ... Anyone can help?
Hi everyone, Does anyone know what could cause the external source configuration not to synchronize with AD even though it is set up correctly and connected? Maybe you know what permissions in AD does the user for synchronization need to have? The ...
I have a couple of questions concerning Zone authentication policies and Movi provisioning/registration. Environment:Movi version: 4.2VCS Expressway cluster (2 peers): X6.1VCS Control cluster (2 peers): X6.1Microsoft AD 2003Authentication method (sta...
Hi, is there any way to see the content of the provisioned phonebook through telnet or SSH on the C20 Codec? i want to be able to tell if the system is getting a phonebook from the tms and whats in it without actually going to the system physically. ...
Does the video option on CUPC only work with softphones or is this suppose to work with IP phones as well? Trying to see if this is a limitation or if I just don't have my configs setup correctly. When I try and switch to Deskphone, I don't have the ...
Raising this up through TAC, but I thought I'd ask here as well...Current environment:Movi 4.1TMS 12.6MSE8000 - 4.2 (1.43)VCS X5.1.1TCS S4.1When scheduling a Movi user to be recorded via the TCS (and subsequently hosted by the MCU), the connection fr...
I have a client that currently has a number of endpoints with Multisite licenses, primarily 6000MXP units. The client has grown to the point where 6-way calls are no longer adequate, and they're going to have to buy an MCU.My question is:Can the cli...
