TelePresence and Video Infrastructure

Dear all,We are trying to upgrade the CUCM from 8.0 to 8.6 in our lab environment, there are some problems in the upgrading process.1.How can we know version of  CUCM is either Restricted version: UCSInstall_UCOS_8.6.2.10000-30.sgn.isoOrUnrestricted...

Hi All,We have two locations: one with CCM4 cluster and other with CUCM7. The clusters connected with Intercluster trunk (no GK).Voice calls are working properly for all types of phones. We have problems with video calls from/to CUCM7 SIP phones to v...

hi,Is EM7 monitoring tool supports the video conferencing devices.Please suggest a guide for implemenation of the same.Regardsgaurav

Hi all,Hi have a CUBE with 12.4.24T that as the folowing issue :When i call to the same number i have two diferent behavior from the SIP provider and from the CUBE.The first call i have the folowing call flow and the call is OKReceive INVITE(SDP) fro...

hello,i have a very strange problem when i try to log in on VCS using URL:https://vcs1.mydomain.it             -->        It fails the user credentialsIf i use the Ip Address 10.65.2.152 the login works perfectly using the same credentials.Just to ma...

Hi there,I was wondering if anybody had some problem with the Cisco Demo license...I have some FXO line in a 2901 that goes through mgcp to CCM 8.5.1, the 8.5.1 speak to a third party app with SIP.the problem right now is that 1/5 of time dtmf doesnt...

Cisco/Tandberg has proposed a giant video system with video servers, etc., and they seem to require software clients in the field to run MOBI.  Our management was interested until they found out that MOBI does not have all the "other" features that C...

Just a quick question? Does the 2500 IP camera support multicast? Or is it unicast only?

Wondering if anyone has any feedback of "Bluejeans Network" working with Cisco Telepresence equipment?working? not working? limitations?Anthony

one of my customers need to put 3000 MXP behind a FW and he needs to open the ports needed, is there any document list the ports used by 3000 MXP.Thanks & BRMoamen

With Andrew Beezley Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to ask Cisco subject matter expert Andrew Beezley troubleshooting questions regarding the Cisco TelePresence System, from the CTS 500 to th...