TelePresence and Video Infrastructure

Hello,we try to setup a sip account with cucme 8.0.it seems to work good but supplementary-service is not working and codec is a problem.we cannot set call-forward all with sip.we use g711 alaw codec for sip and with this codec it is not possible to ...

When trying to upgrade a CTS-1000, it fails and gives the message in the logs "ERROR: Codec firmware upgrade is disabled".Every other unit in our network upgrades OK.  The Cisco documentation I have seen says "Contact TAC for assistance".  Anyone abl...

If we have a telepresence unit connected to our MPLS provider (Telco A), and we're interested in having a conference with an outside company on a different provider (Telco B), what are some options to make this happen?Is it possible to have dual telc...

Are third-party Telepresence endpoints interoperable with CTMS?Anyone tried using any Polycom/Tandberg Telepresence endpoints with CTMS without having to interface through CUVC?

Hello,We have a Video SIP Endpoint registered in CUCM 6.X. For some reason we are only getting one-way video (CUVA to SIP). The SIP endpoint is sending a video stream, but CUVA is not receiving it...Does anyone have success making a video call betw...

hii have CTMS v1.6.0.0-108 when i change the Qos to setting to i want,  it go back to AF11 for both TP and CUVC after i hit apply !!is this a bug,, is there any workaround !!

Hi everyonemy connection likeTanberg1--------IP--------Gatekeeper---------CUCM----------2811-----------PRI----------PSTN----------Tanberg22811 use most recent IOS 12.4(24)T3the Tanberg1 doesn't have any BRI/PRI on it, IP only, it register with gateke...

If I have a TelePresence Segment and a SD endpoint - what would be the call flow in setting up an ad-hoc or scheduled video conference between the two endpoints?What is the role of the following components:CUCMCTMSCUVCAlso, which device is produced b...

Our voicemail appears to be down for the users.Unity Call handlers are working, and when you call in you can leave a message.But, when that user checks their voicemail, after entering their PIN, they get dead air.Also, the users are not recieving the...

Folks;I have a new system that is using VA version 2.2 and IP communicator Software.  Camera is a generic USB camera that we use on numerous systems without trouble.  Camera works with other applications no problem, System is Dell 780, XP SP3 and a m...

Can someone please explain the call flow of escalating an IM between two CUPC users to a multi-party video conference?What functions do each of the following play:CUPCCUCMCUVC

Hi, all,I have a very strange voice quality problem. We have a remote worker who has 7941 phone plugged to a C851W SOHO router, C851W is configured as ezvpn client, the 7941 phone registers to CUCM in HQ, HQ has a 2821 MGCP gateway conncts to PSTN pr...

Hii just wanted to confirm that the CTS software upgrade through CUCM need to be done as below CUCM os admin > install/upgrade >> TFTP file management then upload it from there using directory as / because if i use install/upgrade then > software ins...

Hi,I have a question about the CT Manager 1.6 Integration1. To begin a session we necesarily needs to push the start meeting button or is there an option to begin automatically the TP meeting? Thanks