In the GUI Interface of the Cisco MCU 3545 (+1EMP), I can see the maximum video port support supported simultaneously in a videoconference ?IPVC-3545-MCUIPVC-3545-EMPVersion : 5.5
I am trying to position Meetingplace Express solution for videoconferencing appllication for existing customer having Asterix call controll system.Does anybody have some positive experience with interoperability between these two products ?Thanks,
I have the LinkSys SPA9000 and SPA400 setup with a connection to a standard UK analog line from BT. The two IP phones and an analog phone on one of the FXS ports have registered just fine and ext. to ext. dialling is working just fine. The SPA400 has...
Hi all,I have a cuscomer that is migrating all branch connection to dsl circuits, since dsl use atm encapsulation and in order to reduce the impact for the atm encapsulation we will change the voice codec paylod size to 30 for g729. My question is:Th...
Guys,not sure of what is going on because the phones were working when we tested a month ago. anyhow i have 7961 and 7941 phones connected and we are using the vt cams and the vt advantage software. im getting no phone present but if i use ip communi...
Hello all,i got a issue with my video portal appliance. when i try to make a deployment i get an error, im put this attachment with the Error Screen. I will appreciate your help.Thanks in Advance.Robert.
Hi, guys,CUCMBE7.0 system.When I try to access OS from GUI, and click show network, I see the error message:"The system is currently locked by another process. Please try again later."I can access the OS from CLI with no problem. System is in product...
We have severla sites using video on workstations and Cisco 7960 phoens.It is working.Recently one branch stopped working with "Videio Bandwifht Unavailable" on the phones when trying to connect.Qos settings have not changed since it was working and ...
Hi, How and where do you set video bandwidth, what is defualt bw settings for vtadvantage and also when using a webcam and cupc? Im trying to figure out where this setting is, what it is and how it might be changed so that we can set up correct video...
Hi Pros, I can understand why our PRIs sometimes send one single call out of more than one channel at time. See the output below:0x3FF8EA 1A23 0x667E9734 4/0/0:23.8 4/5:1 4502345634 g729r8 999/601710x3FF8EE 1A25 0x667E9734 4/0/0:23.10...
Hi All,What components do I need to implement a digital signage solution for 20-40 endpoints on one LAN?Can I use the DMP only or do i need a DMM to go along with them?Does the ISR require ACNS modules in this case(LAN)?Appreciate your help on this.
Hi,I have two existing CME systems which I wish to allow internal calls between. These calls will go over an IPSec VPN. However the calls are failing.Phones DN22xx - London CME 2801 - PIX505 --- Internet ---ASA5505 - India CME 2801 - Phones DN400xI h...
If we are using a PC camera and VoIP phone does the Video Advantage require a license? Is so are the licenses used when inistalled on the PC or when they use the product and make a video connection? Can you explain how it works?
