Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have a c1861-B/K9 and it appears to have S/T BRI interfaces but in the USA we need U Interfaces. Is there a US version of this router or do I have to get external NT1's?ThanksRich
Hi,We are trying to integrate Microsoft OCS 2007 with UCM 7.0(1) using SIP trunk. OCS does not have any PSTN gateways and everything from OCS is sent to UCM (except PC calls from one OCS client to another). The goals are:1. Single Number Reach betwee...
Hi,all.I have a Cisco VT camera II,and my computer's OS is vista. I want to know whether is there any driver for vista or not? If there is, where can I get it?Thanks.
I am working with a public school district to interface a ViewCast 6116 encoder to a T1 (not PRI) to stream their public access programming to AT&T's U-verse PEG system.Can someone point me in the direction of a video capable router with the needed C...
HI i am configuring ISDN line on cisco 2821....The problem is that even though i get a tone but when i put the line in my router i am seeing my Layer 1 as Deactivited Kindl see the attached Logs and see if i am doing anything wrong .Moreover the con...
Hi! We have a follow equipment: Cisco 3825 with running CCME 4.1, CCM 4.2(3), MCU 3845, phones 7961. I'm trying to build meet-me video conference with ccm and ccme participants but there is only voice without video from the ccme part. Direct video ca...
we have cisco 7206 router , integrated with Nortel PABX. there are two PRIs terminating on router1 from Nortel one is configured with 31 time slots and other os 16 time slots . issue is with PRI for 16 time slots outgoing calls are not working networ...
<br /><br /><br />If a company uses the Unified Communication Manager and they want their business to be able to have online sales demonstrations are seen as on way to increase the productivity of their sales staff. An internet based approach to demo...
Hi Guys,Hope you can help. We have recently migrated a site in Brazil from a MD110 to CUCM 6.1.3.3000-1.The end users would like to block Call collect callscoming in from the PSTN to all extensions except 4 special phones. I have not used E1R2 before...
We have Cisco 6.1.2 with Meetingplace 6.0 MR4, CUVC with 3527 Pri G/W and 2800 Gatekeeper.We have configured the Polycom HDX in CUCM as H.323 device and can place calls between HDX and Phone with VTA. VTA can place calls to HDX. We can also place c...
Hi everyone!I am an Junior in PGW 2200 configuration. Do I need to re-install PGW2200 when I change the IP Address of it?Please give me any ideas?Thanks
Guysi have an opportunity to implement video conferencing for one of our customers. i have one question more from a personal standpoint can OCS be fully utilized as a video conferencing solution on a Cisco IPT Platform.im trying to see the pros and c...
We are trying to get our 3845 to handle video calls. We meet the Cisco prerequisites.Downgrading the Polycom speed to 2x64 and it works, when bumping the speed up to 256/384 it wont establish the connection.Do we need to create ISDN pools or somethin...
