Need to be able to set the read/write parameter on the internal memeory on a DMP from the Advanced Task area of the 5.0 DMM.Anyone done this before?Thanks.
Need to be able to set the read/write parameter on the internal memeory on a DMP from the Advanced Task area of the 5.0 DMM.Anyone done this before?Thanks.
I've got a Cisco2821 used as CUBE connected via h323 to CallManager 4.2 and on the other hand connected via SIP to Microsoft Mediation Server.When I call from OCS to a CiscoPhone, sometimes there is no voice and when there is voice, it is not possibl...
Hi, We have network with the Cisco VoIP, we are facing the difficulty with restart of VoIP regularly . If I do one call it restarts for another call and in between it restarts.we had doubt on our network we have isolated the VoIP Network with Our LAN...
Hi,I succeeded to use Video over IP between a CCME 4.0 and a CCM6.0.I'm using the H323 protocol with codec g711u.There are the success and problems :1.From a IPCommunicator registered with the CCME to an IPCommunicator registered with the CCM6.0the v...
Hey there,I was making some (deleting stuff)changes to a working voice config. Then I decided to load my config that I KNOW works. the router gave me a warning that mgcp was still running but I went ahead anyway. I then reloaded and now it doesn't gi...
Hi,I'm trying to connect VideoTelephony between CCME and a CCM6. The CCM6 is the main Office and the CCME is the remote office. I've tried it with H323 but the problem is that the Call succeed but NO VIDEO.The VTAdvantage with the CCM6 display the Re...
call Manager version 3.3.4CISCO IP Communicator V 2.0.1.1Laptop: HP 6730BThe voice breaks a lot This happens only on HP 6730b laptops only voice gets chocked before initiate the call. We are using the HP Headset during this call. Users try logging to...
Hi,I have a cisco communications manager 6.1.2 with a cisco 2821 (c2800nm-adventerprisek9_ivs_li-mz.124-20.T.bin)We need to attach the gateway to an external gnuGK Gatekeeper.(http://www.gnugk.org)I have successfully registered my gateway to the gate...
Hi I have 2 sites one with CCM 6.1 and another CCME 4.3Between the two sites, VPN tunnel is established over the Internet.Both way calls are working successfully.Customer wanted to explore whether video will work in this scenario with Cisco Video adv...
We have setup toll bypass to save long distance charges. For example if someone calls from Dallas to Houston, they would go through the data network and come out in Houston and go out their local phone lines. I have set this up by getting a list of...
Is mobility advantage included in 7.0 or do i still need a separate server. I want to use unfied mobile communicator in combibnation with Nokia E71
Hello,I am working on a design for my organization for streaming evening board meetings across the IP network to the community. Can anyone share what is the best practice for this need and what solutions does Cisco or (third-party) offer that will fi...
What is the best way to dedicate conference resources video, audio and web on MP 6.x for executive office that would be avialable at all times (maybe with the same meeting ID?
Someone requested to have their phone beep every minute when they have someone on hold to remind them they are still on hold. Can this be done? They have a 7960.Thanks.
Hi,I have a confusion with the configuration of the MCU in CallManager when i want to have a multipoint videoconference where 3 SCCP viedo endpoints(7985) and 1 Polycom video endpoint (H.323) participate all in the same confenrence!Here is attached t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-25-2024 03:44 AM | ||
09-24-2024 11:38 AM | ||
09-24-2024 02:13 AM | ||
09-19-2024 12:06 PM | ||
09-09-2024 06:26 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |