TelePresence and Video Infrastructure

Hi all,is it posible make a tunnel between two ata 186?i'm trying to transfer all telephone-data from ata1(port1) directly to ata2(port1), doing something similar to tunnel. example of use:1- pbx connected to ata1#port12- ata2#port1 always on and rea...

My customer has DMS 5.0 deployed and has several DMP's deployed across their WAN infrastructure.What they are seeing is that it seems to be constantly sending the content out to the DMP's instead of the DMP's caching the content.Is there something in...

Hi,get an error mesage as belowError code 22923 System is not supported to configure video meetings Get this error message while scheduling a video conference from MP web.Regards,Shams

I'm testing this feature with these scenarios:7960 + CUVA / 7985 > CCM 5.1.3 > ISR GW 2811 (12.4(20)T) + VIC2-2BRI > ISDN > Polycom ViewStation SP3847960 + CUVA / 7985 > CCM 5.1.3 > ISR GW 2811 (12.4(20)T) + VIC2-2BRI > ISDN > IPVC GW 3527 (v5.5) > G...

I'm installing a small H.323 network which uses the gatekeeper included in IOS H.323 version 12.3 (it is in a Cisco 2610XM)I have a MCU which is contained in an Polycom iPower 9800. This equipment is a video terminal too. Ihave other video terminals ...

Hi,Is there a way to know "how many voicemails a unity subscriber is receiving per day".Unity 5.x voice mail only.Exchange 2003 sp2.ThanksMudassir

Hi All,I have a client wiht the following setupMD110 -- FXO ports -- 2821 -- IP -- vg224 -- FXS -- Analoge PhoneThey are not able tranfer calls or place on hold from the analoge phones using the hookflash button.Is there anything special that I need ...

Hello Everyone !!I am running CCM 4.1.3 sr6a and I am trying to integrate a Codian/Tandberg ISDN gateway to CCM and I running into this weird issue, hope someone can help !!- The Codian/Tandberg ISDN gateway itself has a built-in auto attendant and I...

I have a VIC-2FXO card on a 3620 router and the module will not show up when i do sh ver, sh diag, or sh inventory. Im running 12.2 Enterprise IOS. Any suggestions?IOS used:c3620-jk9o3s-mz.123-5.binc3620-jk8s-mz.122-46a.bin

HiI added meetingplace express like a conference bridge on CUCM6.1. It's possible do video-conference with meetiplace express?Thanks

With a business-class symmetric service, why would upload speed degrade more dramatically with route distance than download speed? I am working on a 3Mb "Ethernet Express" service from Cavalier (cavtel.net) originating in D.C. Cavtel's fiber networ...

Hi,I am unable to call forward my phone when the lines are busy.a) I can forward all calls to my mobile b) I cannot forward calls when there is no answer c) However, it works when I choose “To voicemail when there is no answer”. Can anyone helps ...

Hi Any one using Vidoe polycom and VoIP over MPLS? We have around 5 offices and they want to use Video Polycom over MPLS. If someone can provide Pro and Con for that and any document or link much appreciate it. Thanks in advance.Sai

Please tell me the configuration points with products for integration.

Hello,I'm doing some testing with IPTV. The setup is as follows. The content is fed into a cisco 2960 (vlan 360). There is a 7206 connected to the 2960 via a trunk port, the another vlan goes off the2960 to the subscribers. The 7206 is for control...