dear alli have ccm version 4.3 with 7961 and 7911G ip phones.i attached and installed vt to my pc..but no connectivity between ip phone and vtany idea please
Can anyone tell me if there is a list of recommended platforms for connecting a call manager voip solution to the PSTN ?Also what circuits do ppl use most? isdn30's ?thank you
I have a webcam V-UJ16 and window vista. Someone told me that if I installed ip communicatore which has the webcam driver, then this webcam will work. IS it the right ?
I am looking for a checklist of things to look for to ensure I have a successful Gateway Gatekeeper installation. I am starting a checklist and would like some input rather minor or major just would like to get some thoughts.rmullen1@hotmail.com
Hi guys!I've been trying to register a E61 Nokia phone in a UC500 with no success.The phone has the ICC v1.1 60 day trial version, i've already added an ephone using E61 mac and 7970 as phone type.The E61 reaches CCME router successfuly via wireless,...
Does anyone have suggestions on how I can use an XVGA/SVGA monitor connected to a DMP? Would like to avoid purchasing a new Monitor and be able to reuse one of my spare monitors to display or test5 the output of a DMP.thanks.
There are and spec for video portal module client requirements, but i want to askif there are any mobile device can use with portal module as clients?Thank you.
hello. i can't do that. when i select end user, because i have LDAP config, i cant creat a new user. i only have the users from domain. What i need to do to put my link sys sip phone work on my ccm 5.1 SCC Protocol.
Has anyone had any good luck connecting a DMP to a Viewsonic N4251W monitor?We are pushing a 1366x768 presentation to this monitor and the outer 2 inches of the presentation is falling outside of the display. We are using the HDMI interface to get h...
Dear all, I am now reading some information regarding the setup of Voip Phone. It mentioned that the Phone is actually a 3-ports switch: Port 1: Connect to upstream switchPort 2: Transfer Phone trafficPort 3: Connect to a PC Actually, what should i c...
We have a call center and have several 1.800 numbers coming in, we were thinking of doing translation rules to come into an assigned CTI port on the CCM. This isn't working, can anyone see what's wrong or give me advice/links on a better way of doing...
Hi,Could you please let me knows what the following means.If you can provide me a link from where I can learn translation rules that will be fantastic.voice translation-rule 6120rule 1 /^02\([01].*\)/ /\1/andvoice translation-rule 10003rule 1 /^[4568...
