TelePresence and Video Infrastructure

Im looking for the cisco spreadsheet for DID's to phones list I can give to a customer. Im not sure of the exact name to search for and its making my hairline go in further retreat.

Can the CME router also be used as the videoconferencing Gateway in a small IPT deployment with a 3515 for videoconferencing? Or is an additional 3522 gateway always necessairy when communicating between IP and other (ISDN) networks?

Hi Guys,I am configuring IPVC 3515 5.1.0.24 to register using SCCP with Call Manager 4.2.1aI created the VC bridge but I am enable to get the unit register on CCM. Any ideas how can I resolve this problem?Many thanks for you help.Goncalo

Ok, I have the IPVC registered as a Conference bridge. But I don't know how to access it?

we are planning to implement IP Telephoney , need suggestions which Access switches Core switches we can use , need to understand IP Telephoney architecture also. Thanks and Regards

Hi,How many 3.5Mbps video streams can the C3750G-24TS handle?Best ones,Leo

*Jan 17 20:56:09.871: htsp_timer_stop3 *Jan 17 20:56:09.875: htsp_process_event: [0/2/0, EM_WAIT_FOR_ANSWER, E_HTSP_RELEASE_REQ]em_wait_answer_release *Jan 17 20:56:09.875: em_stop_timers *Jan 17 20:56:09.875: htsp_timer_stop *Jan 17 20:56:09.875: ht...

I need to upgrade the IOS of our AS5300. Current Version installed is Version 12.2 I need an upgrade to the IOS because there are many SIP features currently not supported. Please let me know new ios version which supports DTMF over SIPyour assistan...

I just install CallManager 6.0 in my testing enviroment, May I know is it configure the callmanager handle call with the third party SIP provide?May I have more information about this?Thanks!

Ok, what takes place when I make a call at 512kbps over ip through the public inet? -is 512kbps just for the call initiation, what is that all about, does the video/audio packets travel at this speed minus or add overhead? Shouldnt it travel at what...

I am trying to add a simple TCL script that will play an announcement to callers that try to make outbound calls when in SRST mode. They have limited calling capabilities when the WAN is out so if they try to call a number that is not available inste...

Here is the requirements for my client, and I need to design their network. They need an intercom system, 10-12 phone lines, 1 or 2 fax lines, voice mail, just the basics. My concern is I need someone to see what they need to do from an infrastruct...

Hi guys,I've a situation where my VOIP and DATA on a different segments. Voice is 10.x.x.x riding on VLAN 701. And my data is 192.x.x.x riding on VLAN 100.The problem occur when our receptionist PC have a software installed for call forwarding for ou...

I have installed two VIC cards in HWIC slot 2&3(VIC2-FXS & VIC2-FXO) on cisco router 2821 (256RAM/64F:c2800nm-spservicesk9-mz.124-6.T7.bin). I saw two voice cards when I was typed show version command. I tried to access into voice-port but I can't.....