Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to upgrade the IOS of our AS5300. Current Version installed is Version 12.2 I need an upgrade to the IOS because there are many SIP features currently not supported. Please let me know new ios version which supports DTMF over SIPyour assistan...
I just install CallManager 6.0 in my testing enviroment, May I know is it configure the callmanager handle call with the third party SIP provide?May I have more information about this?Thanks!
Ok, what takes place when I make a call at 512kbps over ip through the public inet? -is 512kbps just for the call initiation, what is that all about, does the video/audio packets travel at this speed minus or add overhead? Shouldnt it travel at what...
I am trying to add a simple TCL script that will play an announcement to callers that try to make outbound calls when in SRST mode. They have limited calling capabilities when the WAN is out so if they try to call a number that is not available inste...
Here is the requirements for my client, and I need to design their network. They need an intercom system, 10-12 phone lines, 1 or 2 fax lines, voice mail, just the basics. My concern is I need someone to see what they need to do from an infrastruct...
Hi guys,I've a situation where my VOIP and DATA on a different segments. Voice is 10.x.x.x riding on VLAN 701. And my data is 192.x.x.x riding on VLAN 100.The problem occur when our receptionist PC have a software installed for call forwarding for ou...
I have installed two VIC cards in HWIC slot 2&3(VIC2-FXS & VIC2-FXO) on cisco router 2821 (256RAM/64F:c2800nm-spservicesk9-mz.124-6.T7.bin). I saw two voice cards when I was typed show version command. I tried to access into voice-port but I can't.....
Can a 7985 be configured in any way to communicate to Skype video clients?This is a request from a client of ours with deep pockets, and family around the globe. I'm thinking the answer is no ... but it's worth a shot.Thanks in advance,Brian Carscadd...
I tried to install VTA 2.0.3 on a Windows Vista Computer.The installation was ok, the program runs, but I cannot install the camera II driver.Someone says that Vta 2.0.3 can work with vista. Any idea?
%C5510-1-NO_RING_DESCRIPTORS: No more ring descriptors available on slot 0 dsp 1.version is 12.4(7)FOund 2 bugs with no work around, CSCsq12931 or CSCsh63265
Hi-I am looking to deploy 7985's to selected users to enable desktop videoconferencing. Do the 7985's support multipoint conferences using the CUCM conference bridges, or do I need another device? How many simultaneous endpoints do the 7985's support...
Im having an issue with 2 hosts running Cisco IP Communicators. The 2 hosts can make voice calls fine but video is only one way. If I remove the nat configuration on the router on one side, and plug the host directly into the router; the video works ...
I'm just wondering is there a way to unify multiple BRI interfaces in signle than to include it in the dial-peer for easier call routing.Thanks in advance
