TelePresence and Video Infrastructure

Hi i'm trying to get Caller ID working on an FXO port on a MC3810. I've found on Cisco that the Version of the FXO-UK card must be 03.XX or later. I have 03.A0 an still can't configure it. Am i missing anything?Here is the Sh ver from the 3810.Router...

Now I define an E1 pri voice gateway (cisco2821) ,but in E1 pri gateway configuration windows, I don't find the option adding MAC address .But document say it can add MAC to a voice gateway . Why ? My CCM is version 4.1(3) .is it bug?(the picture is ...

Hi,Two yeas before,I imployed a IP/TV system,our clients PCS need to install a client software to receive the living-broadcast.By now,if client can watch living-broadcast just open a IE browser without installing the software.Thanks a lot,Pls send ma...

Sorry My mistake!See TOPIC IP-TELEPHONY+++++++++++++++++++++++++++++++++++++++++Hallo, is there an option to configure a device with a busy trigger=1 ? On the line there is the option busy trigger. We have phones with 2 lines (not shared lines), each...

GreetingsMy customer requires the Video Conferencing between two of his sites those are connected via 512kpbs leased line circuit.He donot want to involve the Desktop PCs for video conferencing. The solution should be something as if he just pick the...

Hello,When we try to view IP/TV content with the IP/TV viewer we are able to but when we try to view it through a webpage I recieve the error:"Could not create RTSP connection with Program manager"I have no idea what the problem is. Anyone have any ...

Hi, we are having problems when we try to start a videoconference from an IP-Videoconference (Polycom VSX7000) using a Video Gateway (IPVC-3526-GW1P) to outside (let's say PSTN)- Polycom ViewStation 128.We can heard audio, but video is never establis...

I have configured our call manager 4.1(3) and 3745 router to place calls form a 7960 phone to a polycom 7000 video conf unit using h.323 gateway and gatekeeper on our 3745 router.the call connects fine and even shows the user name on the polycom scre...

I have a client who is hubbed in city A and I am provideing them dial-tone in city B via a T1 with HDLC encap.If I push their voice/fax out over the T1 to city B voice works just fine, but fax fails 80-90% of the time? I have re-directed their fax ...

I have a customer that is running CM 4.1 w/ VT Advantage clients. They want to connect to a partner that is running a Polycom Video Conf. endpoint. We currently have a PRI going into the 6608 blade of the 6500. The Polycom supports Video over IP. ...

Hi! I would like to add a Sony PCS-1P (H.323) terminal to an existing Cisco (IP/VC 3540, software version 3.2)+ Polycom (Viewstation EX - several terminals) installation. The hole infrastructure runs on H.323, and there's no CCM, so SCCP isn't an opt...

I want to be able to log the amount of active calls at one time. This will tell me if our client is overloading the system with too many calls. How do i enable that on the router, then send it to my syslog server?

Is there a way to trascode SIP phone calls from g711 to g729 when it goes accross WAN and back to g711 from g729 using third party sip call application?

Dear All,i'm working on a simple configuration.I'm using a 2801 with 14.4.t1 for CME 3.4.All is working fine inside, so i can call without problems others CME users.The problems come when i call outside trought a BRI, with these calls i hear a lot of...