TelePresence and Video Infrastructure

HiAccording to Cisco documents use of load sharing per packet is discouraged on VoIP links:http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800ca6ca.htmlOur client insists using load sharing per packe...

Hi,I have 2 applications, video (sent all the time) and data.My objective is to limit the bandwidth on the video and to ensure that the priorities configured do not stop data from being sent.Q1) How do I limit the bandwidth on video application?so th...

hello.I have a voice network with siemens pbx's and a data+VoIP net with cisco routers.I have to merge this 2 nets. The pbx is connected to a 3700 Cisco Router on ehernet- the 3700 only routes between the 2 nets:192.168.0.0(the pbx s net) and the 192...

Can someone explain the call path for calls going in and out of the following configuration?I have a 3662 with a DS1 card connected to an Avaya PBX on the local end. The remote end has a 3810 with (6) fxs cards in it. Each end is configured for all...

Can anyone suggest a soft video phone application that will work with a release of CCM and if you have a configuration/design guide for such an implementation it would be much appreciated.Many Thanks.

I would like to know if there is any cheaper way to get an ISDN BRI to IP Video Conferencing gateway than the IP/VC 3521. We have several picturetel IP video conferencing systems we would like to connect to the outside world via a BRI gateway. What...

Once or Twice a day the Content Manager goes stupid on me. When I click on Ondemand programs on the CM web page, I get the Internal Server Error. It seems this happens with the latest security patches applied to Windows 2000 Server, or XP. The client...

Hi, I have a ATA186, at LAN it uses g711 codec... and I received an information that ATA check the speed of the connection and change to g729 if it has to use a WAN link to get to call manager.Is that right ?Thanks

Hi!I just want to know where i can found SDP protocol documentation on the internet, I got the RFC in the IETF, but i need more sources in other ways.I will be very thankful with your help. Thanks.

Installed VT Advantage and "Enabled" video for my phone. Now, if the VTA app is loaded, I can't make even local calls. Shutdown the app, and I can make calls. I know it's something simple. I only have one Region allowing 384k for video.

Hi,I had two remote sites that are using 3845 routers, with 4 E1 links linking both sites.I had a server that will be sending approx 4M size of video traffic from site A to site B. I am thinking of using MPPP to bundle 2*E1 to cater the 4M video size...

On my CCM Publisher's downloads.asp page, users are not able to download the Cisco VT ADvantage executeable. They get a message "The system administrator has not made this install available". VT Advantage is 1.0.2 and the URL is //ccm-pub/ccmuser/d...

i encounter a problem.in a service provider network,the network manager config two ip address on a ethernet port.i config the pim sparse mode on this ethernet port and specify rp address for this router.the router connect layer 2 switch directly.but...

Hello allI'll like to connect a live sorce to the brance CE or IP/TV 34xx or to som STB , Can any body hekp in how ? Regard Ofer Eliel

I bought the IPVC-3544-CHAS, IPVC-3540-MC03A,IPVC-3540-AS,IPVC-3540-DS03 for my Callmanager.I'm looking for some step-by-step instructions from Cisco on adding the Polycom Viewstations.I assume I give the Polycom's fixed ip addresses, the register th...