How can i enable my gatekeeper on cisco 7200 my current IOS is 12.1.(2)T i cannot enable my gatekeeper it seems to be working before.hope you can help me. thanks
How can i enable my gatekeeper on cisco 7200 my current IOS is 12.1.(2)T i cannot enable my gatekeeper it seems to be working before.hope you can help me. thanks
Hello all,In the data sheet (Cisco IP/VC 3540 Series Videoconfrencing System), I understand all that it is exposed, except the paragraph - Specifications for the Cisco IP/VC 3540 Series Rate Matching Module (Table 7) - that refers to the module Rate ...
I'm working with a client on QOS and traffic shaping. Client has a central site with 7206 router and at 11 other remote sites they have 7204vxr. The central site is connected via ATM OC3. The remote sites all have ATM DS3. I'm setting their ATM p...
Is there a possibility of receiving a Windows Media Stream on the Broadcast/Control Server and forwarding it to IPTV clients/plugins?We are using the Cisco IPTV 3400 Series with the latest software version 3.4.To be more spesific: an outside organiza...
can any body help me learning about cisco video conferencing solution. Is there useful link availbe also recomend it.
Hi,I can watch my programs on the IpTv Viewer. But exist a player or plugins...or something with I can watch it in the browser.My question is: how can I solve it: i send a link somone, and he with one klick can watch the IpTv programs.thxAkos
I have been having lots of problems getting a PRI setup in the GW2P. Has anyone had experience setting up a PRI? If so what type of PRI did you order, etc? I have also been reading in the 3525 documentation to put a CSU between the telco and the IP/V...
i have 2 router 1750-2v with E&M CARD .and serial interface for lease line conectivity.each router will be in one site and will be connected to nortel meridian pbx through E&M INTERFACE AND the 2 routers will be connected through lease line.the E&M ...
Anyone know where to find information about Cisco's Cost Savings discovery methods, and/or their network savings model? I'm having alot of difficulty finding any of this information on Cisco.com.
"Ordinal 6467. Dynamic Link Library file missing MCF42.DLL.." shows up sometime during install and then the setup exits.I suspect this is caused by the chronology of software installs. What comes first? Service Pack 6.0 or IPTV Content Manager 3.4? O...
Does anyone know whether it is possible to password protect the IPTV content manager config pages? The IPTV instruction manual shows you how to restrict access to certain IP addresses, but it makes no mention of passwords! (our IP addresses are based...
How do I disable the IVR on the 3525 IPVC Gateway? I currently only have one internal endpoint with e.164 of 1000. I would currently like all calls to automatically go the that endpoint. It is an iPower 970 room system H323.Here is the route:ISDN Net...
Hi,My question is: When I use the OnDemand category, and i see the program information, i can see, that isn't in multicast range the dest. IP. It is: 0.0.0.0Why?How can I fix it?thx,Akos
I am trying to monitor MPPP link with fragmentation and interleavingusing Agilent WAN Advisor(latest v.15.0), but it seems this box can not decode fragmented PPP, so I have no visibility and right statistics of the linkand layers 3&4. Does anybody h...
I currently have 8 gateways. Three of them are connected to the PSTN the other 5 are at my offices. Each office gateway is setup with pots peers with the phone numbers at that office and a catchall voip peer using DNS lookups for routing. The PSTN ga...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-14-2025 02:13 PM | ||
02-09-2025 12:11 AM | ||
02-05-2025 11:17 AM | ||
01-27-2025 11:28 AM | ||
01-21-2025 03:17 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 |