Hello, is it possible to get the Cisco Roomkit Plus running with Teams telephony as i see i can only register SIP.Happy for your help
Forum Posts
Hello I have a client that would like to upgrade from Cisco TMS 15.2. to TMS 15.10 on the same server BE6K (M4), ¿Can I still using the license I received on TMS 15.2? or ¿ Do I need to buy a new license key? Thanks for your time
We recently upgraded our Expressway C and E clusters from 12.5 to 12.5.5. When reading the release notes, one of the new features we received (in 12.5.4) is the MRA: Support for Encrypted iX (for Active Control) https://www.cisco.com/c/dam/en/us/td/...
Hi, my customer requires a Room Kit for the meeting room. Can I propose the Room Kit with 1 x A-Flex Named User meeting license, without Cloud Device Registration?To rephrase, can the customer adds Room Kit to a user in the control hub without Cloud ...
Hello Experts ; I am unable to dial ip address by use * instead of dot by touh pad . Please advice 172*16*50*40 unable to dial every time it changes to this format172.16.50.40... KV
Hello, I am able to configure most of the Cisco CE attributes using websockets. However, I am able to configure NTP servers & SIP proxy servers. May I know, how to configure them? I tried various combinations, but it is not working: await send(ws, '{...
Hi,I want to deploy the Polycom MCU to integrate with registered Cisco VC endpoint on CUCM through VCS / Expressway.** Call the Polycom MCU room address: 192.168.1.11##7777 (Polycom IP: 192.168.1.1 | MCU room: 7777)Method 1: Polycom MCU registered th...
Hi Do we need any requirments to call from h323 C20/SX80 into webex real IPI think we need a specific TC versionAlso do we need to tell Cisco to enable any thing on our webex account ? if so , what if I need to call any webex meeting with real ip. I...
Had a user tell me when you are connected to a DX80, and using Self-View, a pictures image and lettering on the wall are reversed. This is not the behavior, however, on other TP systems such as Room Kit Pro w/quad cam, MX800, etc...I reported back ...
Hi, Can you please help me with the following issue : Problem Description: The touch screen failed to synchronize with the codec SX20. Action Taken: 1. Swap LAN network cable (not resolve) 2. Reboot the device (not resolve) ...
Resolved! Cisco TelePresence DX80 on CE 8.2.1
Hi All, I recently upgraded the DX 80 to the CE 8.2.1 Software and the upgrade went well, however I have two issues 1) The Video Address on the device is coming up as ext@domain.com and instead of the primary directory URI configured on the extens...
Hi all,we would like to connect several CUCM Clusters to a centralized CMS Cluster with configured SIP Trunks from each CUCM to the call bridges. In the "Deployments with Cisco Unified Communications Manager" guide in Appendix A I found some info abo...
I have a couple Cisco Spark Room Kit Plus units that I have hooked up. When using them they show on the Touch 10, no cameras found. Make sure the control cable between the camera and the system is connected. To activate the IR sensor on the system. ...
I am looking to reuse the tables of my TX9000 system. However the new Cisco Table Microphone 20 is much smaller than the hole. Looking for exact measurements of the cutouts so I can have a 3D print shop make a filler. Thank you!
CONTRACT: 91986130VCS SN: 06B2BD59Running VCSC X8.8.2 and need to role back to X8.5.1 Can I just run the .tar file for X8.5.1 ?? I am aware that need the rel key and will make a backup config ... Thanks.
