TelePresence and Video Infrastructure

Hi If there are offices in India with Cisco Telepresence codecs registered to the US UCM Cluster and planning to use them to dial into Cisco WebEx Conferences , which pass over the network to Expressways in US and then into Cisco Cloud. Do these comp...

Dear Colleagues,I am going to write a simple macro for group button with no success. I guess the widgetID format does not fit, for example: group:call1 (widgetID: group, buttonID:call1) Here you can see the current status: const xapi = require('xapi'...

Hi, Can someone help me with dimensions, number of boxes and net weight for CTS-5K-18-SEAT-UPG Regards, Jeet

Hello, our customer has some external Video Devices which should be registered on expressway. Because they are external we have to use Expressway-E.  Do we need to register the TP-ROOM License on Expressway-E or is it also possible to register to Exp...

Hi, what are the ways cms space notify it's owner that a guest is available on the space? 

Greetings, My customer wants a few of webex room 70G2 and 55 sets.  I am a bit confused when making their BOM with regards ordering of licenses like smp/multiparty and software etc. Are these licenses necessary for ordering with webex room sets?  Are...

Hi,I have seen that the Touch 10's are not supported by the C-Series End Points.  Is this a software issue or a older hardware issue?  I am using TC7.3 which is the same version as SX20's that support the touch 10.I have a C40 that has a damaged Touc...

Hello,The color calibration for my Cisco monitor is way off and I'm looking for instructions on how to re-calibrate.Would be grateful if anyone can point me in the right direction.On the back of the monitor, it states Model: TTC60-21.Thanks so much i...

We've got several SX20's, all standalone, not registering to CUCM or any Gatekeeper. We've got H.323 enabled and set as the default protocol. We're on a few different versions of software, ranging from 9.1.4 to 9.7.x. We see it every once in awhile w...