I have a critical issue of using the IX 5000 system. symptoms are below : At first, it seems main display has displayed nothing of all. but i could control very well at touch10. So i had take a power off process (cold reset) on left side PDU on...
hi, im in need for a wall bracket for the quad camera. anyone knows where i can buy one as i'm having no luck on the internet. any ifo would be much appreciated. thanks
Hi guys, I have a problem relate the connectivity to Cisco Meeting Server. CMS has network 192.168.100.x/24 Endpoints (Cisco, Polycom, Sony, ....) have network 172.16.254.x/24 I routed between 2 networks. When Endpoints connect to CMS, they only ha...
The new Macro Framework that came with CE9.2.1 allows you to create your own small "features" that runs natively on the codec. You can also create a user interface for your features by combining the In-Room Control feature with the Macro Framework! ...
Does anyone have a suggestion on how to redirect all requests to the /tms subdirectory where the TMS website is, without having to put in the /tms at the end of the URL. We don't have an issue on manually putting it in, or anything, just thinking if...
Hi all, We have 1 Cisco Telepresence Video Communication Server Starter Pack Express (VCSE :-/) with a fan error. Vendor change other device for us. Now we need replicate it. I think i need do some task: - migrate license to new server (1). - migrate...
Any ideas would be appreciated... Make: CISCO Model: 5320 FIRMWARE: 4.5(1.89) Build: 6.19(1.89) CPU load: .5% Media Processing Load: 22% ---------------------------------------------------------- Health: All current status "OK" -----------------...
Hi,I am not able to add vcs in tms.Whenever i used to add vcs under System tab>Navigator>Add System it always show system not foundI have attached the screen shoot of tms showing system not found. Please help in resolving this problem.Thanks for the...
Hi Guys, I am trying to understand that why do we need to have a separate domain or subdomain for XMPP in CMS. the explanation in the Cisco documents that we need to use one domain for UCM ( jabber) and hence we need a separate unique domain for XM...
Hi all One of our customers wants to install a whiteboard to use with an IX5000. According to the documentation, the use of an auxiliary microphone is not mandatory, but it is recommended. It is right?. In the case of wanting to use an auxiliary micr...
Hello, I am managing alot of VCS's (Version x8.8.2) and quite a few of them have the following messages in the event log: 2016-09-28T22:36:27.879-04:00management: Level="INFO" Detail="NetworkLimits processing" Command="status" Category="all" Limits="...
I generate a call report monthly showing point to point and Multipoint conference calls. The reason for the report is to show endpoint utilisation. If an endpoint isn't being used or has very low usage, using this report we can re allocate the syste...
Hi, A standalone H.323 with private ip address requires a NAT public ip address configured on the endpoint in order to make call with external h.323 endpoints. A cisco webex room kit plus sip registers to expressway-c and h323 ca...
Dear all How long can I extend the new Table Microphone ? same length as for the Table Mic 20 before with max 100meter ? Thanks for a Feedback. Best Regards Georg
Hi, My question may appear simple and stupid for you Can the Cisco Spark board call a public codec such as polycom just by using it's public IP address (polycom side) ? or it should be registered in a SIP domain to make it possible ? I tried t...
