Reading through the CMS VM guides, the number of vCPUs required depends on the number of calls you want to support, which seems reasonable, however it appears that the same requirements apply to both the edge and core servers. These requirements see...
I have a lab running CUCM 10.0 that has a SIP trunk to a VCS. Previously I was able to place and receive calls across the trunk, but now I can only place calls, not receive. I did recently upgrade to 10.5, but I really can't recall if it ever worke...
Hi all, I need to generate a list of users who have attempted in the past telepresence sessions via movi (Cisco Jabber Video for Telepresence) client or who have been registered to the VCS. Is there a way to gather those information via TMS maybe? Th...
Hi, call disconnected unexpectedly after a fixed period of time . Out of two calls it happened only with one call . So there is no pattern for the issue happened . Firewall is ASA Expressway with two nic How can I know the exact issue Thank...
Hello, we use CMS and want to be able to make outgoing calls to Skype4Business Clients. In our CMS Rooms we would like to call (from the room) an S4B Client Address. Is this possible? If yes, do you have an configuration Example for this? Best Rega...
I can't find a diagram like the ones for the Ceiling microphone that shows a specification of the distance for the room and chairs. I stick to the ceiling mic chart that show installing at 8' high with 14' horizontal range on making recommendations. ...
Hi, Unintentionally I chagent to Non Ad mode. So How I am going to revert do AD mode ? I couldn't find any note in the guides. Regards,
Hi Guys, We recently purchased be6k starting with BE6K-START-MTG35 and and hundreds of enhanced users. Also 2 CMS 1K. First question is, I assumed we gonna have 6 rms license as bundle.. But pak it didn't come any rms license with our order. I think...
Hi, I am playing with the RoomAnalytics feature currently. It works quite well polling the values regularly via xstatus. To be more scalable I want to use the HTTPfeedback mechanism and register a webserver to collect the change events. But xevent is...
Hi, the below logs from expressway -e , What does means src alias here sip:1000@mydomain.com source sip uri, destination sip uri and source ip does not belongs to mydomain.com . What does it mean by sip alias , My firewall does not giving an...
My video endpoints are running TC7.3.7 and my TMS is running 14.5.0. I want to upgrade my tms to 15.5.0 because I am setting up CMS now. Before I upgrade tms will the new 15.5.0 version still work fine with video endpoints on the TC7.3.7 version? Th...
Hey everyone, Looking for a way in CMS to allow hosts or even just non-guests to mute others while not allowing guests joining in CMA or WebRTC to mute others. I've got 2 separate callLegProfiles, but the only way I'm seeing to do this is to set ...
Hi Everyone, since few days i need to activated B2B sip Uri Dialing with our partner, but i don't no where to start. Can anyone help me to setup this feature. regards, JEFFERSON
We had Meeting Management setup and synced it to LADP which worked, but now we getting a LDAP bind issue. 2 users have Operators access which they can still access but any new users cant. 2 users have been added into the AD group with Admin rights bu...
I see the Monitor Connected to HDMI2 of a SX-20 is Flickering continuously with Blurr image.We see this same issue even when we swap the Monitor 2 with the Monitor 1, so doesn't seem to be a Monitor issue.CEC is On.If we restart the SX-20, the issue ...
