Resolved! SX 20 with cucm to call outside
Hi, we have two SX 20 registered to CUCM how these sets call outside units also how other units call us through internet Do we need expressway with rich media session license only ? and how calls done thanks
Forum Posts
Resolved! Expressway as an VoIP sbc
Hello Does anyone know if Expressway (C and E) can be used like and SBC to route VoIP calls to other SBC's? VTC works excellent but I am wondering if I can also send VoIP calls through it? Phones are registered to CUCM. Currently using X8.10.3 Th...
good afternoon everyone., Cisco mx800 dual telepresence, screen has been damaged on the left side, the purchase of the monitor will be managed and I need to know if anyone knows or knows where to get the procedure to change the monitor.please, if y...
LIC-SMP+EP lisence can be purchased/installed after SX-10 deployed?
Does anyone know the symbolic meaning of the SX20 screen photos? The second symbol ~
Hi Team, Why do we use the following commands on a C60, what are its effects on the system. sys-ttpar set-litr Audio/Configuration/EcReferenceDelay[1]/Mode[1] Fixedsys-ttpar set-int Audio/Configuration/EcReferenceDelay[1]/Delay[1] 0
I have a DX70 with no UCM running sipdx70.10-2-1D6-9DEV I want to convert to CE. I have tried changing TFTP server to upgrade.cisco.com or 35.185.22.200 as per doco but it says on bottom left of screen "Unsupported Model. Upgrading" I then read ...
Hello Everyone, We are facing issue while scheduling conference from Exchange. Whenever we are trying to access the logs from XE server we could't see anything for that particular date and time which is just one day later. In auto mail we can see err...
Resolved! CMS : Desktop Remote Control
Hello, We are running Cisco Meeting Server v2.1.7 and CUCM 11.x. We are able to share desktop in cms meeting app although unable to control the desktop. I am new to CMS, is this feature available with CMS. Your advice is really appreciated.
I've deployed TCS v7.2.1 with SIP trunk to CUCM v11.5.1. SIP trunk works fine with standard port 5060. I followed the admin guide to put in SIP TLS mode. Took me some time to get the certificate right and get it uploaded on TCS. On CUCM side the SIP ...
Hi Experts, I've got a question about Webex meetings with UCM registered TP endpoints. Say, I have a WebEx meeting between 4 TP rooms only, no one else invited. Can they all connect to each other without entering a Host key? How staff book the Meeti...
We have recently upgraded an MX200 from TC7.3.6.ea51021 to CE 9.2.3 3ba381b, since the upgrade the endpoint is showing a warning regarding a Certificate Expiry : A certificate has expired 17584 days ago. Please, update. I am not aware of any certific...
Resolved! SX-20 Registration over change layout
Hello , I have registered sx-20 over MRA. In conference call change layout icon now showing on screen. So , i can't change layout. However , Other devices registered CUCM locally , this feature working properly. Regards , Ibrahim.
My office received the MX700 after we had already built our conference room. Because of that the pure size wouldn't work but we are not allowed to use anything else. My idea was to take out the primary guts and put this in a storage closet wiring e...
Hi All, Trust you are doing great, We are planning to move our TMS and TMSXE (15.) from our premises to the AWS cloud, What would be the key areas, prerequisites and dependencies to look out for, how would be ensure the connectivity and reachability ...
