I have 1 question about CMS intergrate with RMX 2000. From RMX 2000, i dial out to CMS and can connect CMS to room test on RMX. Can i call out from CMS to connect room test on RMX 2000 to a space on CMS? If can, how to do it?
Do somebody know by experience or by some official source what is the firmware maker of all cisco-tandberg telepresence endpoints?
There are different series of telepresence endpoints like:
I´m about to take 210-0...
We have an Expressway C/E pair configured with MRA.
When Jabber endpoint successfully connected, we have sound, and presence.
But sometimes the ASA firewall near to Endpoint show packet dropped from Exp-E upper tcp ports to Endpoint upper TCP...
I have been assigned to deploy the Cisco Meeting Server, replacing 5320MCU.
-Integrated with CUCM 10.5.2-SIP trunk created
-SIP trunk to VCS created for h323 end points
-webadmin, webbride and callbridge configured
the included documentation said that because i also ordered the Touch10 devices, my TRC6 remotes had been stripped from the SX10 boxes... and if i wanted the hardware that i paid for, i should email:
problem is tha...
We do have CUCM 11.6, CMS 2.2 and expressway C and E version 8.9. We do have cisco video endpoint running fine. Now management want to add few Polycom devices -
two HDX8000s, one HDX7000 Six HDX4000s, one HDX4500 .
Could you please help me to ...
I tried now to plug in a Chromecast to the Cisco Room Kit and Room Kit Plus HDMI inputs, but there is no picture from the device althought it is recognized as a PC,MediaPlayer,Other & etc on the Touch panel. When I chose share, the video does not sho...
I have been working with this technology recently and I must say I have a few questions which I cam hoping you all can help answer.
1. How does this all work together. I want to understand the whole flow. While I understand what each compone...
Hi, Is the LIC-SX20-MS unique for a S/N ?Or we can buy it , later decide it activate on one of our SX20 ?
When we buy this license we must input it directly to SX20
or must register it in cisco site for preparing option key ?
Hello, I am very new to the networking world and I am having trouble with our video teleconference device. We are using a SX80 and I configured it to the network engineers specifications; however, we are unable to see video or hear any audio on point...
We have configured an SX20 in the CUCM, but we can't find the way to call by H323 to an another PBX like Avaya, that only receive H323.
Somebody knows how to configure this type of calls? or some documentation about that.