TelePresence and Video Infrastructure

Hello ,   We are trying to register sx-20 over Internet (via MRA). But , I'm getting error "Failed: 405 Method Not Allowed / SIP trunk disallows REGISTER" on SX-20 logs. I couldn't any solution. SX-20 logs attached.   Regards , Ibrahim.

Hello Experts,   Does anyone has a good guide reference to do a Migration from MCU to CMS for Video Conferencing and WebRTC? Initially the setup was like this.   MCU->TMS Conductor->CUCM->Expressway-C->DMZ->Expressway-E->Firewall->Internet->UC Client...

Hi all, these are the components of my environment: Cisco TMS 15.3 Microsoft SQL Server 2012 with Management Studio what i'm doing is setting up a Maintenance Plan on Mng Studio and testing backup\restore. I was able to configure very easly backup fo...

Hello ,   We will configure SX20 for registration over MRA. But I'm not sure for following informations. Is these  informations right ?   Username: EndUserID@CUCM IP Address Passphrase: EndUserPassword Domain: Expressway-e external domain (MRA domain...

Hello ,   We are planning to register SX-20 over MRA. However , i couldnt find any option on web interface of codec(Username , passphrase  and domain). Is it possible to register SX-20 via web interface ?   Regards , Ibrahim

I migrated a TMS server in the lab months ago and I'm finally getting around to looking at these errors. Essentially, TMS is generating tickets saying that the services aren't running. The services are running, but TMS is looking at the old FQDN, whi...

I am pleased to announce that CE9.3.0 is released. It comes with some cool new features, for example the new backup and restore feature that allows you to provision backup bundles to many devices at once.   This backup bundle may contain branding, ma...

In cms event log  Info call 26: incoming SIP call from "sip:733777@vc-cucm01" to local URI "sip:777777@10.77.10.165:5060"2018-01-24 07:24:35.971 Info call 26: setting up UDT RTP session for DTLS (combined media and control)2018-01-24 07:24:35.989 Inf...

Our university has recently added Zoom to our service list. We currently are an o365 campus and have a Cisco C90. We would like to tie our C90 into the Zoom service with their Cisco Room Connector. The trouble I am having is that one of the prerequis...

All of our contacts in the Directory on our endpoints show (SIP) at the end of the name, can this be removed?   Example of Current: Doe, John (SIP) Example of Desired: Doe, John   If I use the CUCM UDS on the endpoint it just shows the contact only w...

Dear Please find Attached. We have a Cisco 2911 CME Router  and there is 2 voice card installed each card have 4 FXO lines.    The Most of  days we won’t be able to get both incoming and outgoing calls. unless Re Plug the PSTN line From Voice card.  ...

We recently faced a sip NAT issue. and I would like to get some insights for this problem. call flow: Avaya phone system >> telco IPBE device >> ISP telco IPBE is doing the SIP NAT. The call coming into the telco IPBE device: The invite is from 10.2...

Hi,I am configuring Cisco Expressway "C" & "E" for MRA, but once I configure it the CUCM & IMP Status is showing inactive.I have configured the following:- All the required licenses are uploaded.- Traversal Zones are Active between "C" & "E"- I have ...

We have a few C60 codec, controlled by AMX NI4100 and AMX Touchpanel and will be replaced by SX80 codecs. What do I need to integrate this new SX80 into the existing AMX controller? Thanks, Cecilio Obejero