Resolved! CVI/VIMT Demo license
I need a CVI/VIMT demo license for the customer. And need help with the procedure/direction to get it loaded on control hub.
I need a CVI/VIMT demo license for the customer. And need help with the procedure/direction to get it loaded on control hub.
Well one headache after another .. Running Desktop Pro - Room OS 11.1.2.4Settings > Conference > Encryption Mode = ONI make a call to my local CMS and get the following error: Unable to establish EncryptionCall Log indicates "InsufficientSecurity"W...
Hi,I want to know if the Camera Precision HD 1080p 12x is compatible with the Codec SX80. Thanks,Ivan
Hello,I have cucm 12.5.1 in which i have added webex room kit plus as a device. now i want to configure snmp v3 for it, but i am not able to see any snmp dashboard for the snmp v3 configuration for that device.how can i configure snmp v3 for that.Any...
Hi All,I am deploying the Cisco Roomkit Plus with two units of Cisco PTZ4k Cameras (one for audience, one for presenter).Both of the cameras connected to one network switch. Then from network switch, connected to the camera control of the Codec.I am ...
Dear team, We are observing audio, video loss issue on Room kit which has configured as standalone.It is poly cloud call and cloud call monitor is showing the call was disconnected due to the Reason: “The call was ended after not receiving media for ...
Hello All,We have a couple of SX80s in 2 different rooms. They are set up direct mode not tied to any infrastructure. They are used almost exclusively for connecting to Zoom at this point. We recently needed to move them to a more secure VLAN. After ...
Hi, I have upgraded to CMS 3.3 and while trying to set webbridge3 to work I get the following message in status-> general: "WB3Cmgr: Could not find connection to update webbridge3 info" I have certs setup properly, both with client and server authent...