Hey, Have a sx10 and a couple of sx20. I call from sx20 to sx10 or from sx10 to sx20, the sx10 is only on 384kbps video even if i choose a higher call rate. Why is this. Thanks
Forum Posts
HI, Can any one guide me, how to integrate cisco cms streamer to wowza streaming engine?. i am using cms 2.1 in my lab environment with call bridge,streamer and recorder enable on single vm.
Hi, I have confusing about All product Telepresence Conductor vs TMS vs telepresence server which it come with BE6K , why and when i use them ?
Hi, What ports are required to be forwarded in Firewall for MX200/300 g2 other than 5060 & 5061 TCP & UDP? Thanks,
Resolved! Video conference without VCS
Hello community, I am trying to achieve a video conference solution that can support vedio conference of 3 parties - one room and two remote offices (calling with video capable IP phones). First of all is it possible to have this solution using C...
Hi I have just installed a Spark kit plus but I am getting a camera issue where the system is reporting it cannot see the camera correctly. the error showing is CamerasDetectedNoIr. the image is ok but there is text across the screen indication no ca...
Hi All, We have a CMS running 2.2.8 receiving an inbound INVITE from an SBC (below EXHIBIT A) advertising g.711alaw, which the CMS supports. However, the OK response from CMS is omitting the g.711alaw and causing the call to be torn down (EXHIBIT B)....
Is it possible to make audio only call to a conference/space on CMS and then only launch presentation sharing from/to a Jabber client? The user in this case wants to keep his privacy and not activate the webcam on his PC. Or do you need to enable vid...
Hello all, I am trying to join a meeting while clicking on the invitation link from my iphone device but it is not working Is it a problem with safari browser ? Thank You Elie Gerges
Dears , we have a customer is about to purchase Cisco room kit device but he is worrying that it has security breaches which make it saving its steaming over cloud comparing to Sx20 codec although it's based on premises not on cloud, please y...
Hi all, I have LDAP using SSL for communication. What is the needed configuration (port number, Certificate upload) from Cisco TMS side to integrate with that LDAPs. If we need to upload a certificate to the TMS server, how can it done?
Resolved! Internal call to CMS, DTMP not working
HI all My client is using CUCM System version: 11.5.1.11900-26 CMS version 2.2.7 The problems are 1) Making call to CMS IVR, when CMS prompts for room id, enter the room id on internal ip phones and SX20 (regis...
TelePresence Endpoints can support up to two calls, the first being a video call and second audio only. how i can make both the call to be video calls
Hi All, We have expressway edge and core and their current version is 8.8. Security team told us that they receive notification about the SSL certificate is supporting TLS 1.0 and SHA1 which has a bad rating for vulnerability. May we know on how ca...
Hello, We are using CUCM 10.5 configured with a SIP trunk towards a MCU 5320 running 4.4 code. When a user joins a conference using his endpoint (SX20), he wants to add a participant B by using the sequence *36 B_alias ## Once the above seq...
