Hi,
We have an Expressway C/E pair configured with MRA.
When Jabber endpoint successfully connected, we have sound, and presence.
But sometimes the ASA firewall near to Endpoint show packet dropped from Exp-E upper tcp ports to Endpoint upper TCP...
I have been assigned to deploy the Cisco Meeting Server, replacing 5320MCU.
-license activated
-Integrated with CUCM 10.5.2-SIP trunk created
-SIP trunk to VCS created for h323 end points
-certs created
-webadmin, webbride and callbridge configured
...
Hello,the system does not start up, potentially it is stuck in bootloop. At the start there only appears shortly the CISCO Logo. I will send my contacts by mail now a log for review.
the included documentation said that because i also ordered the Touch10 devices, my TRC6 remotes had been stripped from the SX10 boxes... and if i wanted the hardware that i paid for, i should email:
trc6-request@external.cisco.com
problem is tha...
We do have CUCM 11.6, CMS 2.2 and expressway C and E version 8.9. We do have cisco video endpoint running fine. Now management want to add few Polycom devices -
two HDX8000s, one HDX7000 Six HDX4000s, one HDX4500 .
Could you please help me to ...
I tried now to plug in a Chromecast to the Cisco Room Kit and Room Kit Plus HDMI inputs, but there is no picture from the device althought it is recognized as a PC,MediaPlayer,Other & etc on the Touch panel. When I chose share, the video does not sho...
Gents,
I have been working with this technology recently and I must say I have a few questions which I cam hoping you all can help answer.
1. How does this all work together. I want to understand the whole flow. While I understand what each compone...
Hi, Is the LIC-SX20-MS unique for a S/N ?Or we can buy it , later decide it activate on one of our SX20 ?
When we buy this license we must input it directly to SX20
or must register it in cisco site for preparing option key ?
Hello, I am very new to the networking world and I am having trouble with our video teleconference device. We are using a SX80 and I configured it to the network engineers specifications; however, we are unable to see video or hear any audio on point...
We have configured an SX20 in the CUCM, but we can't find the way to call by H323 to an another PBX like Avaya, that only receive H323.
Somebody knows how to configure this type of calls? or some documentation about that.
I noticed the Spark Board has a web server built into it and I wanted to poke around a bit but the standard UN: admin and Password: Blank doesn't work as the default. I was wondering if the unit is currently accessible via its web browser? or if it ...
Hello,
I have upgraded my SX10 codec to CE8.2.1 for the H323 protocol. It's been working fine until I restarted the codec -- all H323 configurations are gone. I have checked "Persistent" mode for the "Configurations".
Have tried CE8.3.1 but the...
CISCO is far about detailed install, deployment, user guides and api admin guides but where the heck are the warning/error message listings ????
And what they mean and what is a fix action ???
Example: DX70
Diagnostics ....
Warning: Other diag...
We need to use a longer than standard camera cable for SX20. We want to use a Cisco Split cable ( separate female HDMI and RJ 45 ) and 10m HDMI and FTP cables. Unfortunatelly I have found no information about FTP cable pinout. It is a straight or cro...
