TelePresence and Video Infrastructure

Good day everyone,I have a few questions on conference calls between SfB and CMS.Skype infrastructure is on-prem. CMS and Skype are located at the same network segment, users are located remotely via VPN. Link between Skype and CMS is made via Truste...

We have a SX80 that's registered with our CUCM (ver 9.1.2) and we're unable to make direct IP to IP video calls with it. I've created local contacts and set the protocol to h323 and in the configuration I've set the H323 protocol to "direct".  No luc...

Good Morning.I have need to know if Theresa some posibility to use spark and registre my sx10 with CUCM. I know that when startup i need to specify where it's going to register. I need to call int without expressway or viceversaThanks

Hello,I am facing the issue with my camera. After SX20 power off suddlenly, when SX20 boot again, Camera PresionHD 2.5x still boot but then it not work. White LED flick, can not control camera by remote. I checked webGUI, this is No camera is detecte...

I add users in LDAP, and imported into TMS mannually, but I can not find configuration  to synchronize users automatically. for example, synchronization every 30 munites.    I use TMS for device provision ,so I must import users inforamtion into TMS....

Hello Guys, I have the following network infrastructure 1. Cisco Unified Communication Manager which currently provisions Telepresence Endpoints 2. Cisco IMP 3. Expressway C and E which handle Mobile and Remote Access for external jabber users 4. Tel...

I am working on Telepresence Video design for 5 locations and Skype for Business interoperability  is a requirement. I have made provision for CUCM  and Meeting server (Hardware and Software/Lics)  My questions are: 1)    Is a Call Control (CUCM or V...

Hi, We are in process of setting up Video phones between two offices, one at India & other at Australia. We have MPLS connectivity between these offices for communication. I would want to understand usage of bandwidth per call, how much bandwidth nor...