TelePresence and Video Infrastructure

Hi team please help on the proximity part we have SX20 with CE 8.2. version with touch panel, STEP 1). Proximity connected from Andriod mobile device not able to share any content but dial in and dial out is possibleSTEP 2). Proximity connected from ...

Cisco Touch panel auto unpair, We can do the pairing but it just last minutes. Appearing a message on monitors and forcing to use the VC’s remote controller (screenshot attached) Version: 7.3 and 8.2 

Several SX20/DX80 devices are registered to CUCM 11.5.  SIP trunk Set up between CUCM and VCS Control. I followed document 118884, Dial IP addresses from endpoints registered to CUCM with VCS expressway Config Example. I now can dial IP addressed rem...

A customer would like to replace their Cisco TelePresence Ceiling Microphone with a third party alternative. They have the following Audio Technica Mic in mind 1. Model : ES-947LED 2. Model : ES-947 The codec in question is a SX80 Also we would like...

Brand new DX80, worked well out of the box. I upgraded to 8.3.2. Lost touchscreen capability. Is this a common problem?

Hi,In my deployment of remote access I have jabber access (that working fine), and remote access for telepresence devices (that not working). I've tried to register EX90, SX10, Sx20 but without success. From Expressway C logs , I found some repeating...

Hi All, i have sx80, registered to cucm 11, and there are endpoints registered also to cucm. when sx80 call to 2 endpoints, and sx80 send presentation, i see call status on sx80, its show that on first endpoint sx80 send dual stream, but on second e...

Hi, We are getting a error using TMSPE. We import the users from AD, create CMR Profile for the parent Group Meeting Rooms. For this first group the CMRs are working fine and I can see the PMP license been used for them(in Conductor). The Issue is, f...

Hello I know this question maybe asked a many times over But i need to ask this. Sense I'm still new to the whole VOIP and phone stuff that a friend of mine gave me a Cisco-9971. I know for a fact it does support sip and I'm using Freepbx for my pbx ...

Any ideas??? 1. Running TMS 15.4.0 on windows 2012 2. SQL 2012 on separate windows 2012 server No visable issues with TMS. Problem: Trying to add an EX60 IP Address XXX.XXX.XXX.11 Every time I try to add it the TMS tells me a different system is alre...