Hi all,
I have a question. I have three gatekeepers from different vendors, where the Cisco VCS is the heart of the deployment and is neighboured to the other two:
GK1 <-> VCS <-> GK2
Now, I make a call from an entity registered to GK1 to another ...
Hello,
I have ordered an SX80 for a large room. This is my first time that I have ordered the ceiling mics as part of this. CAn you tell me if these are going to work natively as is. Looking through other threads, some are saying that I will need to ...
Hi,
Can i perform a direct upgrade from TMS 14.2.2 to 15.5 release?
Also my customer has TC,DX, SX and Tandberg endpoints. Is there a link to compatibility matrix between TMS 15.5 and different endpoints and infrastructure components?
Thanks
Hi there,
Does someone know a way to batch-create users from a CSV file ?
The reason is that a should find a way to do w/o the AD and I was hoping there was another solution than to create them one by one manually....
thnx
Hi, Cisco Community.
I am using 2.2.4 CMS with CMS App. I enter into my space; however, CMS App doesn't create a link in order to connect to this exactly space with web browser
participants -> invite -> email contains only
You're invited to my onlin...
HI,
I want to create two voice V-LAN on Cisco SF-300 to cater different VOIP (Cisco and Yealink) both has difference DHCP pool.
and SVI created on 3750. and interconnected with trunk mode.
Problem: I can not create 2nd Voice v-lan, on one Voice vlan...
Cisco VCS Starter Pack X7.2.2Cisco TelePresence Profile 52/55 - TC7.3.6.ea51021Polycom RealPresence Group 700 - Release - 6.0.1-340040
Both endpoints registered to VCS as h323 endpoints. Calls from Polycom to Cisco TANDBERG is not working but its co...
Well folks ! i have some issue with TMS 15.5 !
1. TMSProbleUrl Service is NOT running in primary server ! there is NO service by this name under services panel ! i could not figure out where is this service , also the same service is NOT av...
Hi all,
I ma using cisco meeting server 2.0.5 and cucm 11 and everything is fine but when we have a conference schedule with an external end point out side the corporate network with webRtc app the call is dropping after a specified period of time a...
We had to reset the password for the End Points we have on our network (Almost 2000 End Point) using the Templates on TMS. but after changging the admin passwords we lost the connection for all the End Points to the TMS as they were connected by the ...
I have an MXP3000 f9.3.4 firmware.
When someone pushes content I don't see it ...
Most of the newer systems are duo video enabled and I see the content and video from the Codian but on this specific one only the video.
I tried selecting the layout bu...
What is the dial syntax when making a call from the browser on an MXP3000???
Example: Select "call" and enter the IP or Alias in the first number window. No issue.
But when calling into the Codian and then selecting the conference number I have is...
Have a problem where we have the touch panel required error displaying on the codec, no Cisco touch panel is attached to the codec. This codec is used on multiple networks and is factory reset after each session and re-configured from a Crestron con...
Hi,Can somebody explain in simple words what are traversal and non-traversal calls?, what is the difference? And also Does the VCS control below need traversal licenses?,CTI-VCS-CONTRL-K9VCS ControlThanks in advance.
