Resolved! SmartScheduler disapper "audio in"
Hello, I don't understand why from SmartScheduler is disapper possibility add "audio in" when I schedule a meeting, If I click on 3 bar, I found only "manage favorites" Can you have some idea ? Thanks M.
Hello, I don't understand why from SmartScheduler is disapper possibility add "audio in" when I schedule a meeting, If I click on 3 bar, I found only "manage favorites" Can you have some idea ? Thanks M.
Hi Our environment has primarily EX90 and MX300 devices running TP software 7.2 and 7.3. I have set up an SNMP RO string (and tried it with RW too) but can't get any useful information from it. I have downloaded the MIBS CISCO-TC.my CISCO-TELEPRESEN...
When disconnecting a site in TMS it will auto redial on its own. Prior version didn't have this behavior, so wanted to check here before I changed any configs. **Edit- Looks like it may be this BUG: TMS initiate unwanted redials loop to the managed...
Are the Touch10 controllers hot swappable and do they retain all settings?
Hello Is it possible to join a webex meeting directly from the TelePresence SX10 not registered? How do I use the webex session link sent to me? Do I need to make some special configuration in the sx10? I can make SIP videos but I'm stuck with webe...
Hi All, I have received an interesting requirement from one of our customer. They want to use Google Chromecast with Cisco MX-800 Dual Screen. Is that supported ? Has anyone checked or already using same !!
Where can I locate the users manual for the Cisco Explorer 8742HDC DVR?I'm been unable to locate any documentation or support resources for this DVR on the Cisco support site.
Hi guys. I tried to contact cisco licensing dpt with my question but either they don't want to work or they are not competent . I need to add Cisco Codecs SX60, C40 and C90 on CUCM10.5 . Looks like I'll need to get TP room licenses, but I can't fin...
We tested 3 way VC with 3 different VC room. We observed distortion in 3 way video conferencing even when all video equipment are connected to same switch, no WAN / MPLS circuit or other gears in play. Tested with both Sx10/20 video gears, same resul...
When you enter a call in CE8 (I'm using an SX20, single screen), you get the overlay with the share, add and hang up buttons at the bottom. It lasts 5 seconds or so, and because of the new TRC6 remote having fewer buttons, it looks like there isn't o...
Hi all, Does anyone has experience in configuring a TelePresence endpoint (like SX20) with multiple SIP proxies? I assume it is not possible to make the SX20 registered into different SIP servers, but it is possible to configure up to 4 Proxy Address...
Hi all, we use TelePresence Server virtual edition (v4.4) with TP Conductor (XC4.3). There is a request to lock the ongoing conference, even automatically after 5 minutes, or from an endpoint (eg. it was possible via DTMF code with legacy MCU) The ad...
thought I'd try here first just in case someone has seen this before (before I open a case). We've now set up the CMS system successfully to connect to Lync and most things work except the following: calling from a Meeting App client to Lync causes o...
HI All, We are using Telepresence server (vir.2.3) with 2 media 820 ( vir.4.3),Conductor , VCSC. In our environment we are having Polycom VC endpoints of VSX 7000 which will use Cisco VC infrastructure at central sites. Deployed Equipment details...
Hi, As of CE8.0, Cisco removed the SIP Outbound feature which allowed for SIP systems to register on two SIP registrars/proxies at the same time for fail over purposes (2 clustered VCS systems for example) Although configuration of multiple SIP proxi...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-28-2024 08:12 AM | ||
03-27-2024 06:24 AM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 09:29 AM |