TelePresence and Video Infrastructure

Hi support, i have a query on cisco Touch 10. can we integrate/use  cisco touch  10 with amx/ crestron controller for other device control. iuf yes please  tell me that is there any specific firmware for  this. please support Regards Umesh Joshi...

Hi AllCUCM - 9.1(1)TMS - 13.2.1When I try to add my CUCM to TMS I get ' Warning! Connection status is 'No HTTPS response'. I can HTTPS to the CUCM admin pages from the web browser on the TMS server.  I have followed the TMS admin guide, setting up th...

i have a standalone video conference system that have a private ip address and natted through firewall with a public ip address , is it possible to call other vc sites using dns A records like a vc1.domain.com which is tied in the dns to a public ip ...

I have an issue with an MX800 joining a WebEx meeting. The MX 800 has audio but no video. The other participants are using PC's and can see their video and the video from the MX800 but the people using the MX800 cannot see any video. Any ideas would ...

Hi Team, we have one newly added SX20 endpoint and using VCS. outgoing calls are working fine. None of the calls can get through. When it’s connected to H323 will get error 404 not found. But if SIP <->SIP showing as 487 error. devraj.

Hi Guys, I don´t have experience about Telepresence. My Customer is having in the first time the follow problem: is possible access the web interface locally, but, not is possible to access the web interface remotely. I saw in troubleshooting option...

has anyone performed the migration from CTS-Manager to TMS and TMSXE before? i am trying to get advice from someone who has done it before to know whether its worth doing the trial import of the data or whether to just go straight for the actual imp...

Hi, We are experiencing a strange issue when sharing a content on C40 codec. Call setup: Joining the room on the MCU with 13 other preconfigured participants and Content Server. Starting presentation. 10-15 minutes after content sharing starts, pres...

Dears, I have a CUCM with VG, now I need to register (2x DX80, and EX60) to my CUCM. Please advice if I can do a conference for the three endpoints together without using MCU, is this applicable or I need to add a MCU? Regards,

http://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-server/datasheet-c78-736947.html Table 6 lists a maximum of 10 720p30 calls on the 8 core telepresence server virtual machine. However, using this in practice we seem to be ...

When I start the presentation is connect for 20 second an then the presentation is dissconect. I need a configuration anything?

Hello with the help of Leo and others from here and freepbx forum i got my cisco-9971 phone working. My question is on my cisco-9971 phone i can program the left side buttons as extension buttons so i can call ext 701,702 and so forth ito 705. But i ...

Hello, I've inherited an MX700 installation. The unit is now installed, online, and linked up to PCs for online meeting and video conferencing. What if we don't want to use a PC(as you can't take advantage of the 700's camera and microphone), is i...

Hi , I am trying to add Cisco SX20 running on TC 7.3.6 but  we get the message as attached. But the device gets added as Endpoint in TMS. When we see System--Navigator --Endpoints  in TMS . Select the endpoint and go to Settings --View Settings for ...