TelePresence and Video Infrastructure

Hi Team, Here is the pop-up message displayed on my computer, when I have opened the Proximity Icon: Error code AUDCLNT_E_UNSUPPORTED_FORMAT The microphone format is not supported The microphone on your computer doesn’t support 44.1kHz or 48kHz. C...

Hi all, We're facing a weird problem: we can dial to external phone numbers from all endpoints, except a MX800.  Video endpoints are registered to VCS X8.2.2. From VCS there is a SIP trunk to CUCM. I unfortunately don't have a lot of VCS knowledge....

Hi all, i am newbie here, i have Telepresence server 4.2, conductor CX4.1 and BE6k from last year purchased, and use screen license. please share any deployment guide for this, i got document guide use SMP and PMP only. thanks ucok

We have cisco sx20. Our requirement is simple. We want to have the content sharing and client's side video side by side. Right now, when we do the content sharing, there is no space for client's end video. Is it possible to have content sharing in on...

Hi Community, Just a quick questions, we have video endpoints registered on CUCM with their SIP address as extension@CUCM_IP_Address format. For example 9700@10.1.1.100 SIP address of endpoint. We have Expressway Core + Edge in the network and want t...

Dear All, I am not able to book this exam (500-005 TX9KMAN). It is also not a retired exam. Do we have any replacement for it. Regards, Rajinder Parsad

We have a C40 CODEC with the 7.1.4 software. The system has two cameras but one of the cameras is rarely used. This cam is connected on a remote wall plate.  The system has been poping up a message "lost connection to camera". I thought if we plugged...

Is there a way you can connect a video device to a Cisco DX80 using USB?  When I attempt to connect a video device to the USB port I receive a message "the USB Accessory Device has been disabled by the administrator" and I cannot find a way to unlock...

I have been trying to test CMR with unregistered H.323 endpoints from Polycom and Lifesize units, and not having any luck. I have been following the CMR deployment guide for WBS 31, but there is limited information on how Annex O capable units to dia...