How do I revert changes back to the old OS on my endpoint system? It was upgrade to RoomOS-11.0.1.7 last night and now we are seeing issues in sharing content with Teams. I would like to go back to the old version. Currently we are using Webex Hu...
Forum Posts
Hi people. First post here... We have a setup at our Church consisting of a Black Magic Design ATEM Video switcher and four (4) of Cisco PrecisionHD 10280p12x cameras in a daisy chain being controlled over VISCA. The ATEM has an RS422 interface - and...
Hi Community,i was very happy to read about native AirPlay Support on RoomOS in the now relaesed Stable Version.i want to get that working in my company network on 22 devices now.all RoomKit or RoomKit Plus devices.found now this help article: Config...
Since last Roomkit update, the touch capacity of Samsung Flip doesn't work anymore with Roomkit mini.(version RoomOS 11.0.1.9 adc13d8cb42)The Samsung Flip is correctly updated with the last firmware (1210).The flip button doesn't appear anymore on th...
Solution as follows: We have integrated Cisco Webex with MS Teams CVI. we are looking for MACROS script to add MS Teams Icon in the Touch 10 to dial a VTC conference ID. Thanks in Advance
Hello,How I can use the micro USB service port to change the settings on the room navigator? I need to change the date to 2023 because of the bug/CSCwd23669Roger
Dear All I have a cisco MCU 5300 that was installed in a datacenter that had power problems and the MCU has been damaged it has the alarm light at the front panel lighted and if we connect the computer to the console port after the boot period the ...
How do i regenerate the checksum such that the new hardware and existing serial number match up? This is for Cisco Content Server 7.x. Dustin
How to deal with scheduler when we have multiple dedicated webbridge nodes with dedicated certificates knowing that the scheduler must trust each Web Bridge it connects to. This is the ultimate goal to demystify the C2W Connection between the schedul...
Does anyone have any experience sending one cisco microphone to three different codecs via the 3.5 mini plug? The scenario I am considering is having three codecs on three diffeent classifications and only one codec is powered on at any given time. I...
Are both displays mirrored when local presentation is active on Room Bar?
Hi all. Is there a way to turn the wallpaper lock off?
Hi Folks, We are planning to upgrade CMS 2.8 to version 3.6. I have already checked that we have to do step upgrade as per release note. CMM 2.8 version has smart licensing option. Is it possible to test smart licensing on this version and then move ...
Are there drawings of the Cisco Room Kit EQ showing the codec's inputs and outputs? I can't find them on the Cisco site.
I'm not sure what's going on here. I've got an Expressway C and Expressway C built on VMware (UCS C240M5 server, vmware 6.5.0 Update 1 (Build 5969303). We're not using these in production yet but as I was learning about them (I'm not an Expressway e...
