TelePresence and Video Infrastructure

Hi Expertsyesterday ....... i post the discussion about how i can reserve one analog telephone line for one of my user so whenever he make outgoing call his calls go through one particular analog line and never found busy tone .... in reply to my thi...

Dear all Just for sx10 setup question, Does SX10 version TC7.2.0 support black list for incoming call ? Also does this version has some options can disable the system register status when using ip to ip call ?  thanks in advance!!

hey guys, i have a problem in expressway. the diagram is just like this= CUCM<--->Expressway-Core<------>Expressway-Edge<---Internet--->Jabber i have configured the expressway and cucm to use the TLS encryption mode end-to-end but when i wanted to lo...

Hi, I have license LIC-SX80-MS. Will it support video conferencing. Will it support only 3 partcipants or more participants. I don't have any conductor or TMS. Regards

Good day all We have an SX80 installed at a client with some network related issues.  Here is the problem: When running a continuous ping to the SX80's IP and you try and access the Web Interface the ping drops and no access is allowed to the web-in...

Hello,I would like to use a remote control with the EX90. i.e. TRC 4.Is it possible and how would I do it?I've read on some forums that some people were able to to it on TC3 by setting the SystemUnit Menutype to Full.I'm on Software version TC4. Befo...

Is there a way to create a new userid and password on an SX10 endpoint? We are converting from CTS Manager to TMS and have over 100 endpoints. I'm writing a script that we will apply through telnet. I would like to create a new user account so TMS do...

Hello!, I recently installed TMS, TS and Conductor. I think something is missing After I finish the hole configuration I try to get in to the http://172.18.174.25/tmsagent/tmsportal/ ; where 172.18.174.25 its the IP of my TMS. Only appear the  schedu...

All, I have 8945 phones deployed via sip, and just recently I discovered end users where the video portion was no longer operational.  We had to reset the endpoints to recover the video portion of the phone. We did have a maintenance window on the s...