TelePresence and Video Infrastructure

Hello Gents,I am running into an issue with a deployment involving Mobile Remote Access using Expressway C & E.The components involved are as follows: CUCM: 9.1.2.10000-28CUC:  9.1.2.10000-10IMP: 9.1.1.41900-1Expressway: X8.5.1 In fact, Jabber client...

Hello,I forgot web interface CISCO C40 password. please any one can tell how to recover the password. Thank you.

Can anyone provide me with a document that lists the meanings of VCS Search History status messages???I have one message keeps popping up "Temporarily Not Available" and in the ISDN code 41. Any assistance is appreciated.Thank you. 

 1486Hello all how calculate one interactive Video call bandwidth over MPLS networks Thanks

Hi All, I  want to upgrade Telepresence content server Applianceright now they are running window server 20032003 is going to expire after 2 months that’s y they want to upgrade to 2008 Current TCS Hardware Configuration : Microsoft Window server 200...

Hello,what is the best solution for multivideoconferencing with Cisco.We have CP-9945, TPS500, Tandberg TX3000, CP-8945, Polycom HDX7000 , CUCM8.6 (that will be upgraed to 10)The goal is that there will be a conference bridge that is reachable from I...

I found another challenge on CUCM to dial URI with an IP-address as extension instead of domain name, e.g. room@172.30.12.13.In SIP Route Pattern  you can define a IP-address or IP-address range with use of mask e.g. 172.0.0.0/8.But is there a way to...

Hi!Trying to move from 5.3 (appliance) to 6.2 (virtual server). After running the migration tool (6.1) I realise there is no way to move the exported data directly to 6.2 in one go. Looks like I have to go via 6.0 first, however the 6.0 is not availa...

I´m trying to configure a telepresence SX10, but it is showed the error above.Is there any way to configure without the SIP authentication? Error: Call Protocol RegistrationThe system is not registered on SIP. It will not be able to place or receive ...

Hello, we have a Cisco TelePresence SX20. We would like to know if it's possible to configure an IP blacklist, to block the H.323/SIP calls coming from specified IP addresses. TIA and regards.

Hello, we have a Cisco TelePresence SX20, connected to a Cisco TelePresence ISDN Link. We are looking for some working ISDN test sites (possibly in Europe, and with a loopback service, if they exist) to test our device. Which ones could you suggest t...