TelePresence and Video Infrastructure

Hi,I have a number of Cisco C40 endpoints (TC7.1.4) registered to CUCM (10.5.1).There are some settings on the codec itself that i want to change:QoS DiffservNTP Server AddressDefault call rateScreen LayoutEverytime i make these changes and the endpo...

Hi,I have recently installed 2 x CTS 500-32 and 1 x CTS 1100 inckuding touch panels into our VNOC.  All endpoint have been registered to CUCM and as I have upgraded the software from CTS 1.7.4.1(283) P2 to cmterm-CTS.1-9-1-68R-K9.P2.cop.sgn on the en...

I can not telnet to port 80.xConfiguration NetworkServices http mode: onAny thoughts on this issue.

Hello all Is there any way to change the conference screen (when it asks for PIN, for example) when using conductor and Virtual TPs?In this case I'm connection using a rendezvouz conference through Conductor configured with a Virtual Telepresence Ser...

Dear Team,I have a TP Collaboration deployment with VCS/TMS/TCS for Different types of Endpoints.We have two Content Servers for recording, but the cluster license is not ordered. Do we have any other deployment options without clustering(since clust...

Hey Guys, Have a client who installed a regular display and turned it by 90* (degrees) and connected a SX20/C40 to it. We need to rotate the signal coming out of the TP now. Is this possible ? ThanksVR

I have 20 location, in each location I have conected an ip camera which must comunicate via ipsec vpn to the server where are stored the data. What models of cisco do you recomand for this situation?

Hi, I have added my two units of SX20 in CUCM 10.5 via sip and both are registered and calling each other.  Can some guide us whats the usage if vcs expressway? and how to make video call outside the network? Whats is role of codec and where ? Regard...

Can someone explain the CO2 savings calculation to me? My management wants to know how the figures are calculated. Thanks.