Hello, I have two SX80 TelePresence Devices installed on same Network. I want to make call ( IP to IP ) between two Sx80 and the Result was no call Establish between them.Are there any configuration required to do it from my side to add to the SX...
hi, just want to know that how the VCS-E server itself works to avoid attacking whether the outside LAN IP can not be ping and web access? or any other ways? thanks a lot
Hi Guys,i have a Problem with Movi / Jabber User on the TMS, i have changed from tms agent legacy modus to provisioning Modus, and now i can not Delete Users on the TMS, i can add user but i can not delete, when i delete users there comes a server er...
Hi,In one of my customer loacation we installed one 1941 router.Below is my requirement that i configured.My customer have polycom video conferencing devices installed behind the Cisco 1941 router. Cisco 1941 router is configured for basic PAT for ge...
Hi all, I'm trying to manage an SX20 via API for an application development. In "codec-sx20-api-reference-guide-tc72.pdf" Page21, how to POST xml file to a codec is mentioned.But it doesn't work.Is my procedure incorrect? URL => http://<ip-address ...
We have a C40 which is no longer booting up. it only shows the Cisco logo and will freeze. upon accessing the unit thru web, we can only see the message "maintenance mode" and the only available tab are the diagnostics and the maintenance. We have tr...
Dear everyoneI have one Tandberg 3000 MXP, the problem that I have is, with the main Cam, this worked without problem if I not try to make a zoom or move the CAM, but when I try to do this, the Cam turns off in automatic, show that the main Cam is di...
Hi everybody! I'm looking for information about max version of TMS on Windows Server 2003 + SQL 2005.I found that 14.4 still supports Windows Server 2003. What about SQL 2005 and how about correct work of this versions together?
HI All,I have a SX10 telepresence unit with CUCM 10.x and 2911 router with 3rd Generation cards. Is it possible to make video call or conference over my E1 PRI.Please advice how to achieve this if this is possible.
We have an SX20 that will connect to our Polycom DMA vMR just fine, but our EX90 will not. Settings are the same on both units as far as we can tell. We can connect to our Codian and make calls to IP's on our network with no issue. Not sure where to ...
We have an SX20 that will connect to our Polycom DMA vMR just fine, but our EX90 will not. Settings are the same on both units as far as we can tell. We can connect to our Codian and make calls to IP's on our network with no issue. Not sure where to ...
Hi GuysWe have a SX20 and we needed to hook it up to 4 external ceiling mounted microphones (Audio Technica ES945) We have connected them to a Audio Technica AT-MX351A 4 channel mixer and on to the codec through a standar balanced XLR to 4ring 3.5mm ...
