Hi, is there any datasheet of Conductor in french language?
Hi, is there any datasheet of Conductor in french language?
If I have 3 VCS Controls with traversal zones to a single VCS Expressway, all in the same SIP domain, does this break anything? Assuming no endpoints on any VCS use the same alias.If 2 or more of the Controls are setup with Device Provisioning, can ...
Hey all,This is kinda of a dubble port as I tagged it onto another thread dealling with Lync 2013 integration, but it may well have been missed, so I though I would re-post in a new thread.I would like to know some information about the Cisco MSE 80...
Hello I recently had to disconnect the touch screen from one of our C60 dual head systems to clean up some cabling. When trying to reconnect the touch 8, it will not pair with the device. I have direct pairing turned on, and have rebooted the codec a...
hello all,I planned to integrate the exchange with tms instead of ctsman.Could you help me about an integration guide and also with your advices. Thank you.
Dear Experts,Do codecs Cisco C60 or Cisco C90 which have MultiSite optional key allow us to display image on separate screens during multi-point conference, e.g. to display each participant on a separate screen connected to codec during three-party c...
Hi Experts, We have a new requirement, in which we are planning to use the C90 codec with multiple input camera's and pc presentation. Our customer wants to send three sources at a time to far end. (like two cameras + presentation) . Please confirm i...
Hello friends,i want to upgrade my VCS non-traversal calls.They do SIP<->SIP, H.323<->H.323, right?So my question is what is the price for example for 100 non-traversal calls or where can i check?Thanks
Hi All,Here is what I'm trying to accomplish and here is what is happening.I'm able to bind LDAP with the TCS version 5.3 under Configuration > Site settingsI created a Security Group in AD with a bunch of test users and also added it to the TCS unde...
Hi all,There are a few posts on the upgrade to x8.1, but I couldn't quite find one on this. I thought I had posted once, but I think Cisco's "upgrade" to the forums have lost the original post (plus causing a few other issues!).I think that the port ...
Hi All, We are planning to move few video units from CUCM 8.6 to CUCM 9.1. I know if we move IP phones from one CM to another CM, we need to delete CTL,ITL files. Is there something we have to take care in video units?
Hi all,I try to disable the H264 RCDO protocol with the TMS on custom command on all the endpoints (for resolve one issue with lync2013 client)It work for the C-SERIES EndPoint but doesn't work for the MXP EndPoint.I have try with this command:<confi...
Dear Experts,Do codecs Cisco C60 or Cisco C90 which have MultiSite optional key allow us to display image on separate screens during multi-point conference, e.g. to display each participant on a separate screen connected to codec during three-party c...
I used an EXPbrand HDMI to DVI converter to connect to an SX20. In running moninfo all of the edid data was correct but no image on the SX20. In trying a different pc same thing, tried resolutions of 1024x768, 1280x720, etc no difference. Third PC on...
Problem description:---------------------------------I needed to add the SIP registrar to MCU 5310 and I got those errors in logs: ----------------------- 19586 2014/03/08 00:28:37.567 SIP Error Registration failure due to...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-02-2024 07:36 PM | ||
10-02-2024 06:18 PM | ||
10-01-2024 08:17 AM | ||
09-28-2024 08:06 PM | ||
09-24-2024 02:13 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |