TelePresence and Video Infrastructure

Is there a way to disable the Call History on the Touch 8 (attached to a c-series or ex-series unit)?What about the Call History in Jabber Video for Telepresence?I've a client that would like to do this, in order to discourage return calls in certain...

We have implementation of VCS control with VCS expressway within an internal leg of the Fortigate firewall with no dual NIC. We have NAT-ed virtual public IP for both inside the firewall. both VCS are in the same subnet (private IP and NAT-ed virtual...

Hi guys, We have a client reporting that he is receiving numerous fax calls every now and then, we got him to diver the call to a fax machine and trying to get the sending number and it is keep changing or sometimes come up with a dummy one like 1234...

Hello everyone, I got a quick question, how many input can C90 show at once during a call. I understand it can process up to 5. In short, Can i have the primary and secondary camera shown together during a call?? Thanks,Ken

 Hello,What is the best implementation for a SIP trunk between a VCS control cluster and a CUCM cluster (1 Pub + 1 Sub)?Should we create 2 Sip trunks from CUCM publisher one to VCS control 1 and a second to VCS control 2. On on VCS control 1 (Master)...

Hi All, In my understanding the deployment guide does not clearly state that the Encryption key is a must, it simply states that "The TelePresence MCU has the ability to use a secure connection for communications."I don't have a valid service contrac...

I have a C90 that has a multisite license and the multisite works for the most part except for the second site that is connected to the call.  The second site get audio but no video is transmitted.  All they see is a black screen unless context is be...

Hi GuysI have the following solution in place.VCS Control Cluster Neighboured to a VCS control running B2BUA application for Lync Call and an Advanced Media Gateway.We have a large number of Lync Calls to our video environment that are being disconne...

Dears,I have paired SX20 with ISDN link, the incoming call audio and video are successful, but i have issues for outbound calling, they are going out by H323 calls and they are disconnecting by message "cannot connect call" also when i am trying to c...

Afternoon!I've been having a look on my SX20 web management (TC6.3.0.3d8e7d1) about programing a shutdown but I didn't find any menu for it, is it possible?Best regards.