TelePresence and Video Infrastructure

Hi all,I want to get your idea about upgrading the mse 8710 version from 2.3(1.55) to 3.1(1.97)This effort needs any key that shlud be renewed?According to documentations no need. But I prefer to ask around based on your exprerinces.Thank you so much...

Good afternoon.One of my clients is having an issue where the content server is being dropped on some conferences.TMS is on revison 14.3.1There are two first generation Content servers both running 5.1.The customer says that some conferences ran and ...

Does any one have info on how to hang up a meet call that some one put on hold iSent from Cisco Technical Support iPad App

Hi all,Please, is this the right community to discusss Cisco StadiumVision issues? If not....to which one should I subscribe?Thank you.Mario Behring

Hi allJust a quick question of is it possable to Hide the clock/calender from the main screen with out hiding the whole OSD?The units we are using are sx20 with ISDN links and are not connected to the internet so every time these get unpluged the dat...

                   According to the available Cisco documentation Multiway is supported on endpoints that are registered on CUCM.So I've configured Multipoint on my VCS. I've configured on the endpoint the Multiway alias and adjusted: xconfiguration ...

Hi guys I just finish to connect the tms + tmsxe but i see in the pdf that there is allso a tab on my outlook like an addon thT i need to install. Where i can download it  ? Thanks sharon .

I am scheduling conferences via TMS with an MCU bridge. After adding multiple participants to the conference and changing to the "Connection Settings" tab it automatically adds the MCU due to the need for bridging. Then i see it chooses how to connec...

Hi, This is Paul. I brought some topic with TMS.Whenever I try to log out, closing all window tabs are needed.Does it happen to you guys as well? I need to fix this repetitive work..Can anyone share some tips for avoiding it?Best Regards,Paul

HIWe are experiencing an Issue with TPserver 8710 with soft version 3.1 (1.97)The TP blade is a single Blade installed in Slot 5 of a MSE 8000 the TPServer is registered in SIP in a VCS-C.The TPServer is Locally Managed.After about 4 minutes of a TP ...

All,I have heard that the Cisco Touch 10 available on the MX series products will work on an SX20 running TC7 firmware.Can anyone verify this for me, as the data sheet says only MX seriesThanksDavid

Hi,When I do an Ad Hoc conference with 3 IP Phones 8945 (VGA 30 fps) at 384 kbps I see the following :Active, 3 endpoints , 3 screens        Does it means I'm using 3 screen license for this low quality (384 kbps, audio included) conference ?In the s...