Currently, I have a primary Cisco MCU 5320 and a slaved 5320 that are not accepting my username and password. The sign on was working a couple of months ago. How do I recover to get access to my MCUs. Thank you. Hector Mejia
Forum Posts
Expressway Version X12.5.1I have an Expressway - E in my setup using it for MRAI have got an error as mentioned in title. " Next Restart will trigger the factory reset". Please note that we were having two nodes in Expressway Cluster in past but now ...
Hello,according to https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingApps/Web-App/Important-information-doc/Important_information_CMS_webapp_3_3.pdf (Page 16) in-call DTMF was possible with the old WebRTC Client but not in WebApp 3.3...
Does Cisco have a good IP to do a VTC IP test call? Like a bridge of some sort.
Hi, We have a tandberg 1700 mxp desktop video conferencing deviceAudio not working no speaker no micI checked speaker and mic in menu but no sound in speaker and mic not working.Could you please help me?
i have an old TTC7-18 Tandberg VC unit, does anyone know how I can use it strictly as a webcam? Or if I can.... Thanks
Resolved! Remote access to Webex Desk unit
I was given one of the newer 21" Webex Desk units. I have it registered to my on Prem 12.5 Call manager and it works great. What I can t figure out is how to either remote into it via SSH or Web like I used to on my SX/DX units. I did my best googl...
I have some installations where I use third party camera's, like in our World Headquarters Auditorium. When I install the Room Kit Plus/Pro system and don't use the camera bar, I receive a message on the screen 'No Camera Connected'. I've been able...
Hi, Expertise, I lost SX20 admin password, and try to reset the device on following step, but failed. PLEASE HELP. 1. Power down the system by pressing and holding the power button until the LED light goes out completely and the system shuts down. ...
Hello,Can a 3rd party HDMI cable be used from the camera to the console box with this system and what's the maximum HDMI cable length can be used without any issues?Thank you,AK
Resolved! TMS 15.1, 15.5 and 15.6.1 and CCC issue
Hi guys, When I tried to open CCC I receive the following alert, "Java support has not been detected. This page requires Java to be installed and enabled in your browser. Java may not be installed, or may be disabled in your browser due to configurat...
We are receiving lots of zoom invites and not all of our invites come from people with zoom's room connector. As a result, I would like to register one codec to zoom and the other codec to Webex while using a single speaker track or quad camera. I ...
Hi, I need help with creating a macro on a CE 9.12+ codec, please. What I want is a macro that will disable Multistream mode ("xConfiguration Conference MultiStream Mode: Off") when the codec is in a call with Webex, and re-enable it when it is not c...
Hi,I have a problem with my Cisco Exp-C, my systems are currently displaying the error"Current hardware does not meet supported Virtual Machine configuration requirements".My current version is 14.0.2 (I upgraded from 12.7 to 14.0.2)I also tried to r...
which one from red highlighted can i uploaded into cucm and upgrade webex pro from it
