Help. Is it possible to enter multiple SNMP Community Strings or just one? I can enter multiple Trap Hosts just fine, but I would like to have a different community string per trap host.
Help. Is it possible to enter multiple SNMP Community Strings or just one? I can enter multiple Trap Hosts just fine, but I would like to have a different community string per trap host.
Hello,I just need your confirmation about the following setup.VCSC ------ FW ------- Internet | | VCSEWe are using Dual Nic option key with NAT.VCS expressway wil be connected with onl...
Is it possible to change between TCNC and TC firmware versions on the CIsco SX20?SW Image Non-Encrypted SX SeriesSW Image Encrypted SX SeriesWe have a Cisco SX20 pre loaded with TCNC, but want to put TC firmware on.Is this possible?
Hi AllI have a customer who has a C40, dual screen on the latest version of firmware (6.1.1). Outputs to the screens are on HDMI. They are used to it being full screen self view on both screens but now after upgrading the firmware its always the wall...
Hello,I have been told that TMS has a max limit of 100?Any ideas?Thanks,Andy
Hello,I was wondering if you have seen this problem in the past. My company just recently pruchased two extra Telepresence 8510 Media blades to increase our capcity on our 8000 Chassis. The blades were each installed and configured per the cisco PDF ...
I am currently completing a change request to upgrade the TMS application from 14.1.1 to 14.3.1. I am working throgh the process howver has nayone completed this before and can light be shed on it .Questions include 1. Is this a major relaease ( as n...
Как я понимаю оюа эти термина выполняют одни и те же функции(объединение участников в одну конференцию), но разными подходами и на разных устройствах..Например Multisite реализован в endpoint'е SX20, является платным и позволяет подключать до 3 участ...
Hi, I actually deployed TMS on our customer site. When it comes to accessing TMS, There is Redirect Loop error which blocks the access TMS. But for my colleague, he actually could access to the TMS properly. I am using Window8, Explorer10 and Chrome...
Hi All,We are installing VCS-C and VCS-E currently and so far, most intnernal testing is working fine (although we still have a ways to go to be 100% at this point,) however, external calls are not working. We get several calls per week to/from dire...
Hi Experts Our network setup is we have VCSc&e, Conductor, TIP 7010--2Nos,TMS,& ISDN GW.TIP servers are managed by conductor, VCSc & Conductor is connected on Call policy services. All the equipment’s are added in TMS.We are using 48XXXX number serie...
I had ordered some TP equipments including SX20, C40, VCS, MCU5310.I'm having trouble finding the licenses according to some items in the BOM, for example:LIC-S52010-TC-K9: License Key Software EncryptedLIC-SX20: SX20 License Key1. How can I display ...
hello everyone i have a problem with the MCUnext is my topSX20 ---- VCS Expressway -----firewall ------- VCS Control ----- MCU (VCSE and VCSC use TCP not TLS communication with each other)and then i creat a conference room on MCU but when the SX20 ca...
Hi all,One of our customer says their C20 was reset to the factory default setting unintentionaly.Is there any way to check whether this is intentional factory reset(by user) or not?They insist that this is hardware failure.Best Regards,Kotaro Hashim...
In the process of migrating from legacy TMS agent to TMSPE 1.0 I was prompted to install Java 6 on the Win 2008R2 server. Will also be upgrading TMS to 14.2.1 and TMSPE 1.1.Since Java 7 is the most current version I would prefer to install that. Ar...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-08-2024 09:08 AM | ||
07-07-2024 01:38 AM | ||
06-27-2024 06:47 AM | ||
06-10-2024 11:20 AM | ||
06-10-2024 11:14 AM |