TelePresence and Video Infrastructure

TMS UPGRADE TO WINDOWS 2008

We have multiple TMS server applicances that have to be upgraded from windows 2003 to windows 2008R2. Is SQL also on the TMS Appliane??? I have a copy of the TMS 14.2 software to install after the windows 2008R2 upgrade. Question is has anyone up...

Always 'On' video conference bridge

Hello,I have searched on line and inquired with my internal team, however I haven't found this option. What I am looking for is the option to have TMS have a video bridge number that is always open/on. Essentially no matter what time of day users c...

TMS Basics

Hellu All,Is there a way i can capture Debugs and logs (wireshark) On TMS.Is there a Guide which wll tought me to schedule a confrence on TMS.Please help I thank u for reading.Dorte..

VCS 7.2.2 - Getting Alarm - An unexpected software error was detected in ntpq[8872]: signal 6, Aborted

Hello,I have two VCS Controls 7.2.2. running vitually on two separate UCS C220 M3 as part of BE6000 and two VCS Expressways 7.2.2 on appliances. All four VCSes are conistently reporting "An unexpected software error was detected in ntpq[8872]: signa...

Resolved! SIPV2 support under dial-peer

Dear Community:I have an old H323 GW on a Cisco 1760 (32MB Flash and 16 MB RAM) that would like to test with SIP protocol. This GW has the IOS: c1700-sv3y-mz.123-13b.bin which as per this link " http://www.cisco.com/en/US/docs/interfaces_modules/cab...

Call Forward DN for CU connection transfer rules

Hi,I have configured fixed forward DNs in 7.13 CUCM and used these DNs as destinations for personal call transfer rules to call out to the public network. The DNs are unassigned but active. The calls work when calling out via ISDN, the exchange doesn...

Testing fxo card.

Hello ALL,Please I want to setup a mini callmanager to manage about 10 IP phones,Please can anyone be kind enough to let me know what I need to archieve this,I am awere I will need a callmanger, Router but I am not sure as I am not a voip person but...

TMSXE integration in hybrid exhange/365

I have been told by Cisco that The Cisco TelePresence Management Suit Extension for Microsoft Exchange will not work with Office 365 in the cloud. However they did not say anything about a hybrid installation. My thought is it will work but I am ho...

transfer remote controlling from camera to codec

Hey guys... i want to transfer the remote controling from camera to codec IR, can you guys help me telling what command should i run to get the results.Thanks...

Resolved! Ayuda

Tengo una gran duda el Router 1841 del Packet Tracer puede manejar modulos de Voz (no acepta el comando Telephony-Service). ¿Cómo le podría hacer para que ese telefeno que esta dentro del segmento del Router 1841 obtenga una extensión y se pueda cone...

C90 sending multiple streams to TCS

Hi all,I have a C90:Input 1: Main CameraInput 2: SDI CCTV CameraInput 3: HDMI LaptopI would like to know if it is possible to send more than 2 video streams to the TCS for recording.Meaning to say, id like to record all 3 input on my TCS.Or can the T...

PrecisionHD USB via TP extender

Is it possible to extend the usb between a pc and a PrecisionHD USB camera via TP-cable, f.ex with an Extron USB Extender?

Cube Video call hold resume issue

Hi,I'm setting up a test environment to allw video calls to pass trough a cube.9951 - cucm - sip trunk - cube - sip trunk - cucm - jabber for windowsI was able to get it to work for both audio and video, but as soon as I put the call on hold and try ...

Unable to delete TMS reporting templates

I am unable to delete old uneeded TMS reporting templates built by other users, even with full Site Admin rights. Is there an easy way to correct this and is it a known bug in TMS?

Resolved! How to make the ip dialing between unregistered device with registered device in VCS

hi , in my infra i have VCS 7.2 .VCSE7.2, mcu 8510,tms 14.3 ,cisco endpoint sx20 ,polycom endpoint hdx7000,8000 , lifesize and Aethra Vega X5 All cisco and polycome and lize size device is registered with vcs and works fine. Aethra not added with v...

TelePresence and Video Infrastructure

Forum Posts

TMS UPGRADE TO WINDOWS 2008

Always 'On' video conference bridge

TMS Basics

VCS 7.2.2 - Getting Alarm - An unexpected software error was detected in ntpq[8872]: signal 6, Aborted

Resolved! SIPV2 support under dial-peer

Call Forward DN for CU connection transfer rules

Testing fxo card.

TMSXE integration in hybrid exhange/365

transfer remote controlling from camera to codec

Resolved! Ayuda

C90 sending multiple streams to TCS

PrecisionHD USB via TP extender

Cube Video call hold resume issue

Unable to delete TMS reporting templates

Resolved! How to make the ip dialing between unregistered device with registered device in VCS

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

MX300 Volume control issue

HDMI Problem on ISB7100

Cisco Expressways SSO for admins with MFA

FN - 72542 related to BroadWorks

MX800 Screen Issues

CMS Recorder / Certificates

CMS Edge instead of Cisco Expressway for External WebRTC

CMS 3.6 Edge server

Manage multiple CMS clusters with 1 CMM

Room Kit - Dual Display Presentation Mode