Hi everyone,Currently I need to integrate Cisco TelePresence ISDN GW 3241 with Radvision MCU 5100 / 5200 series,does anyone has ever tried it before?did it work?Please advise,Thanks,Ovindo
Is there anyway to restrict the Conference Factory feature to a certain subset of devices?Is there also a way to hide the SIP address of multiway from the outside world?
Hello,I have just set up a C20 VTC in our conference room. This equipment was purchased before I got to here and after setting it up I have found out that our company only has ISDN VTC. So I need to get a converter from IP to ISDN. From searching ...
Is it possible to use an ISDN GW 3241 in conjunction with an MSE 8000 or would we have to purchase an 8321 blade for our MSE 8000? We currently have VCS and VCE so my thinking was that we just register it to VCS. Thoughts?
Hi ExpertsWe have two endpoints one registered with our internal VCS control1 and another registered with the VCS control2 at other location.The VCS 2 is at another branch of our office.We had connected the VCS2 as a neighbour and we are able to see...
Can someone confirm which email template is sent to the user who books a meeting? The most obvious one is now tagged as LEGACY. I am not sure if that implies it is no longer used.Basically I want to be able ot pull out the hyperlink to the server in ...
Hi there, have been asked to have a look at Cisco TMS product and the brief was as follows:- 5 admin users = 1Glasgow, 1Edinburgh, 1Dundee, 1Inverness, 1Aberdeen able to login and manage their own regions video conferencesfor example theGlasgow admin...
Hello,We recently had a problem with a EX90 and requested a RMA.We received the new EX90 but it doesn't have the AC Adapter which seems to be also failing.Does anybody know the part number of the AC Adapter so we can order it? We did receive the powe...
Hey GuysOn my CUCM we have setup Direct to VM using the pattern *XXXXI have a requirement in UCCX to re-direct a call to a Direct VM. Voicemail is Unity Connection.UCCX cannot send in a call redirect an "*" so the call fails.I've been able to confrim...
Hi,We have 2 call manager, 1 in HQ and 1 in Asia. We can VOIP each other for normal call. However, when HQ setup the meetme, aisa phone can join the conference but both side cannot heard each other.Anyone can advice?Thks!
I have a customer that was contacted by a third party with a complain about their VCS Expressway.Below is what the third party provided my customer. (I've masked the customers IP address 205.x.x.x)Has anyone seen anything such as this? I do not under...
I´d like to know which is the best way to register Lync server to VCS x702?I try to use B2BUA, but the status in the zone shows "SIP: Failed to connect to (vcs_ip):65070 : Connect failed And the status of B2BUA application :"The VCS is not connected ...
Hi AllMy TMS installation and Analytic installation has been running fine for years but today i got this error on TMS when trying to open the TMS Analytic Extension page.Any ideas?I have restarted the Analytic servies and TMS server but that has not ...
Hi,While configuring 'Phone Book Server 1' in endpoint, I found a issue.I set the phone book server in endpoint as TMS URL. So It was like http://xx.xx.xx.xx/tms/public/external/phonebook/phonebookservice.asmx (xxx indicates IP address of TMS)But I d...
