TelePresence and Video Infrastructure

Hello, We have implemented a 3945 router for H.323 videoconference purpose.On LAN side, there is a MCU (Polycom) and on the WAN, many endpoints.MCU <-> 3945 <-> Internet <-> EndpointsNAT is implemented on the router.H.323 security with SRTP is not wo...

Hi, is  Virtual  VCS and TMS in a HP Server supported by Cisco TAC? Krishna.

HiQuick question - is there any way to set a maximum session duration timer on the Cisco VCS? The main reason is to clear down calls that have not cleared properly on the VCS (possibly due to a dropped internet connection or similar). thanksAnthony

Hi All, We are using a content server for recording our video meetings. TMS is used for scheduling.    The MCU and VCS are used along with the Profile series endpoints. I would like to know the recording file size   for 1 min if the call rate is 2Mbp...

Hi,i have a CUCM -> VCS-C/VCS-e deployment and incoming calls working fine. But outgoing calls not working. I see the following in search history: SubSearch (1) Type: Search Rules SearchRule (1) Name: DNS zone search rule Zone (1) Name: DNSZone Type:...

I have an MXP in a remote office that is NAT'd and registered SIP/H.323 with our VCS-E. (running latest software). We have a standard VCS-E/VCS-C configuration at the home office. If a Jabber user (or any registered endpoint) at the home office tries...

Thanks for any assitance!I'm currently running Java 32bit 1.6 rev 33 on TMS version 13.2.2 on windows 2003In upgrading to version 14.1.1 and later is it OK to upgrade Java to version 7? The install docs say Java 1.6 or later and TMSPE 1.1. (which can...

This one has really got me scratching my head. Our MCU is an 8510 running 4.4 (3.49)VCS is 7.2.1Jabber telepresence video clients observed with the strange behavior have been 4.4 and up.I have a permament room set up in our MCU for testing purposes. ...

All,I am working on a TMSXN integration for a customer and I have some questions, obviously 1) Does Cisco support using an existing RnR database for TMSXN?  If so, does loading the TMS template against an existing RnR database delete any fields?2) If...

Hello, I recently had to move a VCS-C and VCS-E to new segments on the network.  VCS-C went to another internal vlan and the VCS-E went to a new DMZ interface of the firewall.  Everything worked fine prior to this change but to facilitate the change ...

Hello. I had some problems connecting thru a ISDN GW 3241 to a Polycom RMX bridge. The call connected with no issues and the video was working fine. The issue I have is with DUO VIDEO. For some reason, when I try to send content to this RMX bridge, i...