I have a MSE 8510 blade and I have the auto attendant configured for 7007. When I call from an endpoint I get connected for one seconnd an then the call drops. The log on the MSE says that it cannot add participant 51 because it has too many par...
I have a cusotmer that has a first generation TMS appliance. I have them upgraded to 13.2 but I have been looking to see if there is an upgrade path to 14.x.since this is a new Microsoft OS, Will the customer have to purchase the 2008 server OS or...
Hello everyone– got a question – if we a VCS-E and a customer has a VCS-E configured properly for firewall traversal and URI dialing– is there any benefit in linking the two with a neighbor or traversal zone? What would be the point? And who would b...
All,We upgraded to TMS 14.2 & PE1.1, after TMS successfuly upgraded we uninstalled JAVA v6 u33 and installed JAVA v7 u17 x64. Then when we ran the PE1.1 installer it bombed and told us to install JAVA v6 u33. So we uninstalled JAVA v7 u17 and insta...
I have a strange issue with a C60 codec not showing the updated config. The console confirms the code has been accepted and uploaded but the detault layout on the codec does not show any changes. The codec is on software version TC 6.0.1Unfortunatel...
We use MCU 4515 with Video Firewall Option (LIC-4500-VFO)But we don't have data related that network between A and B port is no problem. (A and B port is not connect in network)Can you give sheet or advise ?Thank youRegard
We supervise three MCU (4515,4505,4505)We made great exertions to make good use of three MCU I need advice on how to make the most of my three MCUIs it possible for cascading three MCU?Let's think of a way to use three MCU togetherThanks your help
Some endpoints change fram an IP address to blank in TMS and the system is set behind firewall.If i set IP on the system and change to reachable on LAN, everything works fine. When applying a template, it changes IP to blank.Any suggestions?
HiI have a customer trying to access his content server using http. He gets the error message 401.1 access denied, before being able to enter login credentials. Have any of you experienced similar problems?
I'm trying to do an upgrade on an EX90. It should be simple, as it's only 6.1.0 to 6.1.1.When I do it from the web interface, the connection gets reset. Doesn't matter which browser: IE, Firefox, Chrome.When I try it from WinSCP, logged on as root,...
Publication date: 2013-04-29Author: Kjetil ReeProducts affected: Cisco TMS 14.2CDETS ID: CSCug61584Problem descriptionUpgrades to Cisco TMS 14.2 fail because the database cannot be upgraded. The installer aborts the upgrade, and the installation log ...
Going through this community I came across a post that wrote something about a 12 port MCU. I have since searched for it on Cisco.com but failed to find it. Do we have an MCU smaller than the 5310 (20 port @ 448p30) not talking about the SX-20 integr...
Dear all,Our client would like to know more detail information on the cascade port and content port of Tandberg Telepresence Conductor.In the client's network, we have decided to create a conference bridge with Three MCU 4210 (for example mcu1, mcu2 ...
Hello,We are running a Tandberg system, using Codian MSE 8510. We are also running CUCM 8.6 and Lync 2010. CUCM is routing calls for Lync. When a Lync user attempts to join a Tandberg video conference via the audio bridge (dial in), the Tandberg u...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
