TelePresence and Video Infrastructure

Hello, I am looking for the OIDs of the followings:1-SWAP memory Usage                 Total SWAP memory 2-    Physical memory Usage                  Total Physical memory3- SWAP memory Usage                   SWAP memory  Free 4-     Physical memory...

We are running TMS 13.01 and the function to have the serial #s used to pull the maintenace support status from Cisco is working, however I was wondering if there is a way to force TMS to update all systems.Currently If I view a system in TMS overvie...

Hallo all,I've configured serveral permanten conferences on MCU 8420.Now I want book these conferences via TMS and TMSXN.How can I do so?kind regardsMartin

                   Since an upgradge to sofware 4.4 on my MCU, in certain conference one of the partcipants seems out of focus. But when i alter the focus no improvement is seen. Any ideas why this is happening

I need to integrate a Digital Video Recorder(any 3rd party) with Cisco SX-20/C-20. Kindly can any one guide me how would we integrate a 3rd party DVR with it and moreover which DVR we should buy(compatible with Cisco SX-20/C-20). Cisco proposes to de...

All,We have a customer that just installed TMS 14.1.1 & TMSXE 3.0.2.  Everything seems to be working fine, except one minor issue.Booking a room generates at least 3 emails per booking One email from the Exchange to accepting the meetingOne email fro...

Hello Together,How do you that or recommendet wayHow is it with the VCS application if you have on a UCS 220 with VMWare vSphere standard licenses in the case of  disaster like HDD failure or whatwever. This means the hard drives go defective ect... ...

                   I just got a call that during a software update they lost connection at 87% on a Tandberg 880 mxp. It now shows a blue screen and they can't remote into via network. (obviously it doesn't have a valid OS)  I am going to the site to...

Hi My multiway is not working, whenever I am pressing the join all calls, it is giving error that Jabber video was not able to transfer the call to the conference and all all parties listen message that you are the first particepant in the call.Kindl...

Hello,The Cisco C60 administrator guide says that it is possible to get HD1080p 30fps quality at 1472 kbps. But I can not see that. I made a point to point connection between two C60s. When I set the camera setting of the C60 to "motion", I see it ca...

Any help is GREATLY appreciated!I'm experiencing some strange behavior in regards to TURN/ICE and Movi/Jabber.First question: Am I correct in my understanding that Public Default Mediatype Canidate only affects users that are logging into the externa...