TelePresence and Video Infrastructure

Hi My multiway is not working, whenever I am pressing the join all calls, it is giving error that Jabber video was not able to transfer the call to the conference and all all parties listen message that you are the first particepant in the call.Kindl...

Hello,The Cisco C60 administrator guide says that it is possible to get HD1080p 30fps quality at 1472 kbps. But I can not see that. I made a point to point connection between two C60s. When I set the camera setting of the C60 to "motion", I see it ca...

Any help is GREATLY appreciated!I'm experiencing some strange behavior in regards to TURN/ICE and Movi/Jabber.First question: Am I correct in my understanding that Public Default Mediatype Canidate only affects users that are logging into the externa...

                   We are going to implement VOIP with Cisco C2960-24PCL and C2960-48PST PoE switches with SPA303G1 phones and a 3rd party PBX system. SPA303 phones are not PoE supported and can only be power on with the power adaptors comes with the...

                   Is there a good doc/ detail on C90 MIC mixer settings? This would be where you want the 8 MICs to mix input during calls from people in the C90 room during TelePresence calls; of course one can set levels, echo cancellation and suc...

Does anyone has instruction or can point me to a document that explains how to configure VCS endpoints to use SRV records.  i configured SRV in DNS to support sip_tcp, sips_tls and sip_tls on port 5061 and configured SIP on endpoints to use URI for r...

HelloDoes anyone know what is the WAN Requirments for EX 60 and EX 90?Including BW, latency, jitter, and Packet loss in simple way?

Hi,i need some advise from you guys.Situation:- Telepresence Endpoints (CTS,MC,EX) registered on CUCM 8.6- MCU 53xx connected via H.323 (with prefix) and SIP to VCS-C- MCU added to TMS 14.1.1 and i can see the prefixes like the following:E.164 Alias:...

Apparently the password of the admin account is reset to default = empty after upgrading the MCU from v4.3 to v4.4_3.42.This behaviour is not documented in the release notes.For me this is a security issue.

Hello,You know EX series systems have very important features with TE6. First of all, we can use the ad-hoc conference feature of the CUCM for EX series systems. Now the TC6 version released but I couldn't find any information about that in the relea...

Hello,I'm noticing that my VCSe is not giving up traversal licenses after video calls end. Actually, in the call details it shows that it still thinks the call is still up when it's not. So eventually I end up running out of concurrent licenses. I'm ...