TelePresence and Video Infrastructure

Hi all,We want to add a participant via API of MCU, using "displayNameOverrideValue" parameter.But it seems that we can't use 2 bytes characters there.(Overridden display name is garbled...)EX)<?xml version="1.0" encoding="UTF-8"?> <methodCall> ... <...

Hi together,i have the TMS Redundancy  Deployment Guide Version 13.2.  Is the the Version 14.1.1 compatible with the this deployment guide like Load Balancer or other like hot Standby ect..Thx you

   I have serveral C40s with the dual monitor option. I have the 2nd monitor set to presentation only. Is there any setting that would allow me to preview the presentation source without sending it to the far end? or always display the presentation s...

HelloI have a tandber endpoint that has access to internet througt an ASA firewall, the thing is we had some trouble stablishing calls recently and testing the device with another endpoint outside the network, the call got established when we set the...

                   RMA'd our VCSE and received a VCSC applied Licences but unit is still a Control.  How to convert to an Expressway?

Hi,our customer asked if it's possible to NAT TMS's own IP address. A NAT separates TMS and endpoints, but they cannot do one-to-one NAT on endpoints. So the only option would be to NAT TMS itself, but I cannot find information on Administration Guid...

Hi expert, I usely install endpoint visio like C-seris with a touch control, and usely the administrator ask, how to prohibit access to the administrator section in the touch control but I don't fine any solution in documentation of touch control, i...

Hi,I´ve registrated a Polycom HDX-Endpoint via SIP on VCS and added it to TMS successfully. If i want to book the endpoint via TMS or TMSXE, I get an error, that there is no route beetween the Polycom and Cisco Endpoint.I´ve seen, that TMS doesn´t ge...

Hi,I'm trying to configure a touch panel associate to CTS-1300. I want to have the "Directory" tab on the panel to add local contact. I've followed that document, but the tab doesn't appear:http://www.cisco.com/en/US/docs/telepresence/cucm_cts/cucm_c...

This could be a stupid question, but it has confused me quite a bit. I have a layer 2 switch that has the "mls qos trust cos" statement on an access port. I have a device that marks DSCP values as EF, or the ability to mark as TOS. Layer 3 markings.T...

When doing a call to another Cisco C40, I had recentlybeen given a layout option which included a large window on the left part of the screen showing shared content, and tiled video windows on the right side of the screen moving vertically, as below ...